FREE SHIPPING for orders over 85.00

3D Printer Filament Devil - PETG 1.75mm Galaxy Violet 1kg

The PETG filament 1.75mm, also known as PET or PET-G is a material 3D printers, and its main feature is that it is very hard and has an extremely high resistance, therefore the printed pieces with this material are very powerful.
36-00017571
Gross Weight: 1.4kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: DEVIL DESIGN
Part Number: PETG 1,75 GALAXY VIOLET
Made in: EU
In Stock
Ships in 24 Hours
No stock in retail store
24.80
Without VAT 20.00
+
Our quantity discounts:
Quantity 10+
Price 22.32
WISHLIST COMPARE

DESCRIPTION

The PETG filament 1.75mm, also known as PET or PET-G is a material 3D printers, and its main feature is that it is very hard and has an extremely high resistance, therefore the printed pieces with this material are very powerful.

Another very important feature is that its shrinkage is very low, which is an ideal material when you have to print large flat pieces.

PETG is a modified polyester (polyethylene terephthalate), widely used in the industry (most soda bottles are made of this material or derivatives thereof), so it is a material that does not degrade the water. Therefore the industrial use, the PETG is one of more recyclable plastics used.

PETG offers a good alternative to the PLA and ABS, as it offers a higher mechanical strength than these, less shrinkage when printing the piece bends before breaking does not release odors or gases and has an excellent smooth finish.

The only drawback, due to its high resistance, is that it is necessary to melt a temperature above the PLA, but similar to the ABS. The working temperature in the Hotend is 240-260 degrees and the bed temperature about 70 degrees.

The PETG filament does not absorb moisture, so once open PETG materials does not degrade over time and do not need to save it with desiccants.

It is a relatively translucent compared to other materials 3D printer (including the color gamut) material.

Recommendations:

  • Hotend temperature: 220 ° C -250°C
  • Bed temperature (Heating bed): 70°C
  • It is advisable to use the “useful” filament cleaning sponge.

 

NOTES

  • It is recommended spraying with lacquer the glass base, since due to its mechanical properties, can “paste” strongly to the glass if you do not use lacquer 3D printer, being sometimes very difficult to disengage without using lacquer.
  • We recommend to set hotend temperature between 220-250°C and bed to 60-70°C.

SPECIFICATIONS

Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
DEVIL DESIGN
Part Number:
PETG 1,75 GALAXY VIOLET
Gross Weight:
1.4kg
Made in:
EU
Color:
Purple
Diameter:
1.75mm
Material
:
  • PET (PETG,PETT)
Printing Temperature:
220-250°C
Reel:
  • 1kg
Roundness:
≥ 95%
Tolerance:
±0,05mm

EXTRA SPECS

  • Material: PET-G (PET).
  • Diameter: 1.75mm ± 0.05mm.
  • Brand: Devil Design.
  • Weight: 1kg net.
  • Roll diameter: 200mm.
  • Coil width: 90 mm approx.
  • Hole diameter: 50mm.