Το φυσικό μας κατάστημα στην Κλεισόβης λειτουργεί με νέο έκτακτο ωράριο Δ-Π 10:00 - 18:00 και το Σάββατο 10:00 - 16:00. Πριν την επίσκεψη σας στο καταστημα ενημερωθείτε για τα μέτρα πρόληψης. Μένουμε όλοι υγιείς.
 
FREE SHIPPING for orders over 85.00

3D Printer Filament Devil - PETG 1.75mm Samples 6Colors 2kg

The PETG filament 1.75mm, also known as PET or PET-G is a material 3D printers, and its main feature is that it is very hard and has an extremely high resistance, therefore the printed pieces with this material are very powerful.
36-00017211
Gross Weight: 2.4kg
Company: Devil Design
Made in: EU
In Stock
Ships in 24 Hours
Low stock in store
42.00
Without VAT 33.87
+
WISHLIST COMPARE

DESCRIPTION

The PETG filament 1.75mm, also known as PET or PET-G is a material 3D printers, and its main feature is that it is very hard and has an extremely high resistance, therefore the printed pieces with this material are very powerful.

Another very important feature is that its shrinkage is very low, which is an ideal material when you have to print large flat pieces.

PETG is a modified polyester (polyethylene terephthalate), widely used in the industry (most soda bottles are made of this material or derivatives thereof), so it is a material that does not degrade the water. Therefore the industrial use, the PETG is one of more recyclable plastics used.

PETG offers a good alternative to the PLA and ABS, as it offers a higher mechanical strength than these, less shrinkage when printing the piece bends before breaking does not release odors or gases and has an excellent smooth finish.

The only drawback, due to its high resistance, is that it is necessary to melt a temperature above the PLA, but similar to the ABS. The working temperature in the Hotend is 240-260 degrees and the bed temperature about 70 degrees.

The PETG filament does not absorb moisture, so once open PETG materials does not degrade over time and do not need to save it with desiccants.

It is a relatively translucent compared to other materials 3D printer (including the color gamut) material.

Specifications:

  • Material: PET-G (PET).
  • Diameter: 1.75mm ± 0.05mm.
  • Brand: Devil Design.
  • Weight: 2kg net.
  • Roll diameter: 200mm.
  • Coil width: 90 mm approx.
  • Hole diameter: 50mm.

Recommendations:

  • Hotend temperature: 220 ° C -250°C
  • Bed temperature (Heating bed): 70°C
  • It is advisable to use the “useful” filament cleaning sponge.

Important note: It is recommended spraying with lacquer the glass base, since due to its mechanical properties, can “paste” strongly to the glass if you do not use lacquer 3D printer, being sometimes very difficult to disengage without using lacquer.

SPECIFICATIONS

Color:
  • Black
  • Blue
  • Green
  • Red
  • White
  • Yellow
Diameter:
1.75mm
Material :
  • PET (PETG,PETT)
Printing Temperature:
220-250°C
Reel:
  • 0.330kg
  • 2kg
Roundness:
≥ 95%
Tolerance:
±0,05mm

NOTES

  • We recommend to set hotend temperature between 220-250°C and bed to 60-70°C.