ΘΕΣΕΙΣ ΕΡΓΑΣΙΑΣ: Για περισσότερες πληροφορίες διαβάστε εδώ.


FREE SHIPPING for orders over 85.00

AlphaBot2 Robot Building kit for Raspberry Pi Zero

This AlphaBot2 robot kit is designed to use with Raspberry Pi Zero/Zero W (not included). It features rich common robot functions including line tracking,...
31-00012914
Volumetric weight: 0.55kgs
Company: Waveshare
Made in: China
In Stock
Ships in 24 Hours
No stock in retail store
99.90
Without VAT 80.56
+
WISHLIST COMPARE

DESCRIPTION

This AlphaBot2 robot kit is designed to use with Raspberry Pi Zero/Zero W (not included). It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic ranging, Bluetooth/infrared/WiFi remote control (Bluetooth and WiFi are Zero W specific), video monitoring, etc.

Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no wiring. After a few minutes spent on hardware assembing, you're almost there, our open source demo codes is ready to help you get started fast.

  • Weight: 0.399 kg

 

THE PACKAGE INCLUDES

  1. AlphaBot2-PiZero (adapter board) x1
  2. AlphaBot2-Base (base chassis) x1
  3. RPi Camera (B) x1
  4. Ultrasonic sensor x1
  5. Micro SD Card 16GB x1
  6. Power adapter US standard 5V/3A micro x1
  7. SG90 servo x2
  8. 2 DOF pan and tilt kit x1
  9. IR remote controller x1
  10. FC-20P cable 8cm x1
  11. Micro USB connector x1
  12. RPi Zero V1.3 Camera Cable 30cm x1
  13. USB type A plug to micro B plug cable x1
  14. AlphaBot2-PiZero screws x1
  15. Micro SD Card Reader x1 (Extra Free)
  16. Screwdriver x1 (Extra Free)
123456
789101112
13141516

 

NOTES

What's on the AlphaBot2-BaseAlphaBot2-Base on board resource

  1. AlphaBot2 control interface: for connecting sorts of controller adapter board
  2. Ultrasonic module interface
  3. Obstacle avoiding indicators
  4. Omni-direction wheel
  5. ST188: reflective infrared photoelectric sensor, for obstacle avoiding
  6. ITR20001/T: reflective infrared photoelectric sensor, for line tracking
  7. Potentiometer for adjusting obstacle avoiding range
  8. TB6612FNG dual H-bridge motor driver
  9. LM393 voltage comparator
  10. N20 micro gear motor reduction rate 1:30, 6V/600RPM
  11. Rubber wheels diameter 42mm, width 19mm
  12. Power switch
  13. Battery holder: supports 14500 batteries
  14. WS2812B: true color RGB LEDs
  15. Power indicator

What's on the AlphaBot2-PiZeroAlphaBot2-PiZero on board resource

  1. AlphaBot2 control interface: for connecting AlphaBot2-Base
  2. LM2596: 5V voltage regulator
  3. Raspberry Pi interface: for connecting Raspberry Pi Zero/Zero W
  4. IR receiver
  5. Buzzer
  6. FE1.1S: USB HUB chip
  7. 12M crystal
  8. USB TO UART: easy for controlling the Pi via UART
  9. USB HUB interface: extends the USB port of Raspberry Pi Zero/Zero W
  10. CP2102: USB TO UART converter
  11. PCA9685: servo controller, make it more smoothly to rotate the pan head
  12. TLC1543: 10-bit AD acquisition chip, allows the Pi to use analog sensors
  13. Servo interface
  14. USB indicators
  15. USB ports: more USB capability

SPECIFICATIONS

Ηλικία:
12

EXTRA SPECIFICATIONS

AlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.

AlphaBot2-Base, the lower base chassis:

  • 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking
  • Onboard modules like line tracking, obstacle avoiding, needs no messy wiring
  • TB6612FNG dual H-bridge motor driver, compared with L298P, it's more efficient, more compact, and less heating
  • N20 micro gear motor, with metal gears, low noise, high accuracy
  • Onboard RGB LEDs, true color lighting, pretty cool

AlphaBot2-PiZero, the upper adapter board for controller:

  • LM2596 voltage regulator, provides the Pi with stable 5V power
  • TLC1543 AD acquisition chip, allows the Pi to use analog sensors
  • PCA9685 servo controller, make it more smoothly to rotate the pan head
  • CP2102 UART converter, easy for controlling the Pi via UART
  • USB HUB chip, more USB ports for devices like NIC