Charger for Batteries NiMH/Li-Ion 0.5/1A USB

Κατασκευαστής: LiitoKala
MPN: Lii-100
Using micro USB DC 5V input, a single loading slot and microcomputers management system Independent Available two types of charging current...
6.90 (με ΦΠΑ)
Διαθεσιμότητα Καταστήματος
διαθέσιμο για online αγορά
  • Using micro USB DC 5V input, a single loading slot and microcomputers management system Independent
  • Available two types of charging current selection (500mA / 1000mA) 
  • LED displays the charge status 25% 50% 75% 100% and NiMH battery 1.2V Li-FE 3.0 V Li-ion 3.7V Li-ion 3.85 V. 
  • It can automatically identify the lithium battery (Li-ion) and nickel-metal hydride batteries (Ni-MH) battery, Selection iron phosphate treatment manual (Liepo4) batteries and Li-Ion 3.85 V battery
  • There are 0 V activation voltage, 1.6-2.2 V does not charge (but donations will be activated current standard charge flow).
  • Do not overload and over discharge, short circuit, intelligent recognition detection Bad battery and reverse battery protection. (Note: short circuit, bad battery, battery reversal, charger does not work, LED is not lit) 
  • Load mode, constant current constant voltage
  • Using a DC input power to the charger for V-1A work (Micro connector)
Κατασκευαστής :
Χώρα Προέλευσης:
Χημική Σύσταση:
  • Lithium-Ion (Li-Ion)
  • Nickel–Metal Hydride (Ni-MH)
Τύπος Μπαταρίας:
  • AA
  • AAA
  • 18650
Υποδοχές Mπαταριών:
  • Can't charge 1.6 - 2.2V batteries
  • Batteries are not included
  • USB output function: Built with 5V / 1000mAh output
  • Flexible size: One-slot charging and management system, Micro USB DC 5V input port, portable to carry around
  • 500mAh, 1000mAh charging current for selection
  • CC / CV charge mode to maintain a constant current flow and protect battery and users' safety
  • LED indicators display the charging status 25pct - 50pct - 75pct - 100pct
  • When you charge LiFePO4 or 3.85V battery, must fix the charging mode: Identifies 1.2V Ni-MH / 3.7V Li-ion batteries automatically and select manually for 3.85V Li-ion batteries and LiFePO4 battery
  • Refresh function for 0V battery
  • Identify dead or bad batteries
  • Protections: over-charge, over-discharge, reverse polarity, short circuit protections
  • Constant charging with cut-off current less than 100mAh
  • Output voltage: 1000mAh and output voltage is 4.75 - 5.25V
  • Cut-off voltage for output: 3.0 + / - 0.1V
  • Standby current: No more than 15mAh
  • Output current: 500mAh / 1000mAh
  • Compatible Batteries: 
  • Li-lon:
    • 10440
    • 14500
    • 16340 (RCR123)
    • 17670
    • 18350
    • 18490
    • 18650 
  • Ni-MH/Cd':
    • AA
    • AAA

  • 113 x 38 x 30 mm
  • 1 x LiitoKala Lii-100 Battery Charger
  • 1 x USB Cable
Οι φωτογραφίες των προϊόντων μπορεί να διαφέρουν απο την πραγματικότητα. Προσπαθούμε να παρουσιάσουμε το προϊόν όσο καλύτερα γίνεται.