ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

DS2413 1-Wire Two GPIO Controller Breakout

από Adafruit
You are a 1-Wire kinda gal, and you want more 1-Wire breakouts in your life to complement all of your great engineering. 
09-00001551
Ογκομετρικό βάρος: 0kg
Κατασκευαστής: Adafruit
Part Number: ADA1551
Χώρα Προέλευσης: ΗΠΑ
Διαθέσιμο
Αποστολή σε 24 ώρες
Χωρίς απόθεμα στο φυσικό κατάστημα
6.10
Χωρίς ΦΠΑ 4.92
+

ΠΕΡΙΓΡΑΦΗ

You're too cool for I2C, and SPI has so many wires, 8-bit parallel... how can that be fashionable!? You are a 1-Wire kinda gal, and you want more 1-Wire breakouts in your life to complement all of your great engineering. Well rock on, because here you go, it's a 1-Wire controller with two open-drain GPIO. 

You can put as many of the DS2413's as you want on a single I/O line, each one is uniquely addressable and shares the single I/O pin happily. The two controllable I/O lines (PIOA and PIOB) can be used as inputs or outputs. They are open-drain, so if you want to power an LED or something, you'll need a remote power supply (see Maxim's product page for more details

We have a basic Arduino sketch that uses the OneWire library to communicate with this chip. Don't forget to add the 4.7Kohm resistor from I/O to your 1-Wire controller power supply (3.3V - 5V) on the Arduino side of the wires. 

Dimensions: 15.78mm / 0.62" x 9.96mm / 0.39" x 2.94mm / 0.11"

Documents:

 

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Κατασκευαστής
:
Adafruit
Part Number:
ADA1551
Καθαρό Βάρος:
0.001kg
Χώρα Προέλευσης:
ΗΠΑ
Breadboard Friendly: