FREE SHIPPING for orders over 85.00

High Quality V6 Plated Copper Hotend - 1.75mm - 24V - Bowden

by OEM
High Quality V6 Plated Copper Hotend High Temperature Nozzle Heat Block Heat Break Heatsink For PETG PEEK PEI ABS Carbon Fiber All features of the...
59-00012283
Gross Weight: 0.06kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: OEM
Made in: China
In Stock
Ships in 24 Hours
No stock in retail store
29.90
Without VAT 24.11
+
WISHLIST COMPARE

DESCRIPTION

High Quality V6 Plated Copper Hotend High Temperature Nozzle Heat Block Heat Break Heatsink For PETG PEEK PEI ABS Carbon Fiber

All features of the T-V6 nozzle are similar to those of the V6. The T-V6 model is a perfect replacement for the V6 nozzle. Its thread is M6. Can support PT100 V6 BLOCK. And support all series products.

Durable, non-stick, high temperature performance nozzles. This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature 3D printing that other nozzles can't handle. These nozzles are fully integrated into the V6 hotend, Titan extruder Hotend, DDB extruder Hotend and are compatible with Prusa 3D printers

These nozzles are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500°C, and with much-increased thermal conductivity these copper nozzles are perfect for high temperature applications, while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.

In addition to high temperature performance these nozzles have an advanced nickel based plating, considerably reducing the adhesion of plastic to the nozzle. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300°C where a silicone sock can't be used.

Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control.

This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing that other nozzles can't handle.

 

NOTES

  • If you plan to print high temperature materials, the temperature is over 290℃. Please replace the thermistor, we recommend you use the PT100 chip's thermistor cartridge, or the PT1000 chip's thermistor cartridge.
  • We found that many customers do not know how to properly install the nozzle. Remember the core issues in the installation process. Just make sure your nozzle and HEAT BREAK front end are tight and sealed. Otherwise, the melted consumables will leak along the screw holes.

THE PACKAGE INCLUDES

  • 1x V6 Plated Copper Nozzle (0.4mm)
  • 1x V6 Plated Copper Heat Block
  • 1x Tianium alloy Heat Break
  • 1x V6 Heatsink
  • 1x 3010 Fan
  • 1x 3010 Fan Bracket
  • 1x Heating Cartridge 40W
  • 1x Thermistor Cartridge

 

SPECIFICATIONS

Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
OEM
Gross Weight:
0.06kg
Made in:
China
3D Printer Consumables:
Hotend Kit
Extruder Compatibility:
  • E3D

EXTRA SPECS

  • Material: Aluminium
  • Extrusion nozzle: 0.4mm
  • Print Material: 1.75mm consumables (materials, including: ABS, PLA, pvc, wood, etc.).
  • Heater: Voltage 24V, 40W, 1m cable length
  • NTC Thermistor 100Kohm
  • Maximum heating temperature sensitive resistor is 260 degrees
  • Cooling Fan: 30x30x10mm
  • Heating Block: 23x16x12mm