ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Kitronik Inventor's Kit for the BBC micro:bit

από KITRONIK
Get more from the BBC micro:bit with Kitronik's incredible Inventor's kit! The simple way to learn about creating circuits and code.
83-00005603
Ογκομετρικό βάρος: 0kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: KITRONIK
Part Number: KITRONIK-5603
Χώρα Προέλευσης: Ηνωμένο Βασίλειο
Διαθέσιμο
Αποστολή σε 24 ώρες
Χαμηλό απόθεμα στο κατάστημα
29.90
Χωρίς ΦΠΑ 24.11
+

ΠΕΡΙΓΡΑΦΗ

Get more from the BBC micro:bit with Kitronik's incredible Inventor's kit! The simple way to learn about creating circuits and code.

The Kitronik Inventor's Kit for the BBC micro:bit is a great way to get started with programming and hardware interaction with the BBC micro:bit. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs and capacitors.

To get you off to a flying start, we have included an easy to follow tutorial book which guides you through everything you will need to know about programming the BBC micro:bit. You don't need any experience with programming as the tutorial book will guide you every step of the way. You'll be programming and creating circuits in no time!

The Kitronik Inventor's Kit for the BBC micro:bit provides a fantastic way of learning how to construct and control electronic circuits. The BBC micro:bit has a selection of pins that are located on the bottom edge of its PCB (see datasheet below for details). By using our specially designed Edge Connector Board for the BBC micro:bit in conjunction with the breadboard (see below), it is easy to use these pins to connect additional components to the BBC micro:bit.

 

ΣΗΜΕΙΩΣΕΙΣ

  • BBC micro:bit is NOT included. You can buy the Kitronik Inventor's Kit with the BBC micro:bit already included here.
  • This kit requires assembly.
  • No soldering is required and you can build your first circuit in minutes!
  • Requires: 
    • 1x BBC micro:bit
    • 1x Phillips Screwdriver
    • 1x Terminal Block Screwdriver
    • 1x Micro USB Cable
  • Available as a 20pk classroom packyou can get the 20pk here.

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

  • 1x Perspex Mounting Plate
  • 1x Potentiometer & Finger Adjust Spindle
  • 2x Plastic Spacer 10mm
  • 1x Sticky Fixer for Battery Pack
  • 1x Small Prototype Breadboard
  • 1x Terminal Connector
  • 4x Push Switch
  • 1x Motor
  • 1x Transistor
  • 2x Red 5mm LED
  • 2x Orange 5mm LED
  • 2x Yellow 5mm LED
  • 2x Green 5mm LED
  • 1x RGB 5mm LED
  • 1x Fan Blade
  • 5x 2.2KΩ Resistor
  • 5x 10KΩ Resistor
  • 5x 47Ω Resistor
  • 1x Edge Connector Breakout Board for BBC micro:bit
  • 1x Miniature LDR
  • 10x Male to Male Jumper Wires
  • 10x Male to Female Jumper Wires
  • 4x Self-adhesive Rubber Feet
  • 1x 470uF Electrolytic Capacitor
  • 1x Piezo Element Buzzer
  • 4x Pan Head M3 Machine Screw

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Ηλικία:
11+
Συμβατό Micro:bit:
  • V1
  • V2
Κατασκευαστής
:
KITRONIK
Part Number:
KITRONIK-5603
Μικτό Βάρος:
0.001kg
Χώρα Προέλευσης:
Ηνωμένο Βασίλειο

ΔΥΝΑΤΟΤΗΤΕΣ

  • No soldering required - build your first circuit in minutes!
  • Make 10 experiments included in the provided step-by-step tutorial book.
  • All parts are included to conduct the 10 experiments (listed below).

ΑΡΧΕΙΑ

All of the experiments included in this booklet (listed below) are based on the Microsoft BlockEditor and Microsoft TouchDevelop editor software. We have also produced a MicroPython code example for each of the experiments and Video resources featuring a walk-through and hints and tips to help you complete the experiments.

ΒΙΝΤΕΟ

Inventor's Kit for the BBC micro:bit

The Kitronik Inventor's Kit for the BBC micro:bit is a great way to get started with programming and hardware interaction with the BBC micro:bit. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs and capacitors. To get you off to a flying start, we have included an easy to follow tutorial book which guides you through everything you will need to know about programming the BBC micro:bit. You don't need any experience with programming as the tutorial book will guide you every step of the way. You'll be programming and creating circuits in no time!