ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

WeMos LOLIN32 V1.0.0 WiFi Bluetooth ESP-32 Based Board

από WEMOS
The WeMos LOLIN32 board is based on the ESP-WROOM-32 module and adds a LiIon/LiPo battery charging circuit, an USB to serial converter IC and an USB port....
19-00011003
Ογκομετρικό βάρος: 0.01kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: WEMOS
Χώρα Προέλευσης: Κίνα
Διαθέσιμο
Αποστολή σε 24 ώρες
Χαμηλό απόθεμα στο κατάστημα
9.90
Χωρίς ΦΠΑ 7.98
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 10+
Τιμή 7.92

ΠΕΡΙΓΡΑΦΗ

The WeMos LOLIN32 board is based on the ESP-WROOM-32 module and adds a LiIon/LiPo battery charging circuit, an USB to serial converter IC and an USB port. Solder the headers to the PCB and use it directly on any breadboard.

The ESP32 is great for small projects where you don’t need so many I/Os, processing power or interfaces.

  • Development board
  • Wireless Internet
  • Bluetooth
  • 4 MB flash memory
  • Lithium battery interface, maximum charging current of 500mA

 

ΣΗΜΕΙΩΣΕΙΣ

  • All of the IO pins run at 3.3V.
  • Pin Headers require soldering.

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
WEMOS
Μικτό Βάρος:
0.008kg
Χώρα Προέλευσης:
Κίνα
Breadboard Friendly
:
Ναι

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • ESP32 Module: ESP-WROOM-32 from Espressif.
    • 240MHz dual core microprocessor equipped with
    • 4MB SPI flash memory. Support up to 16MB of flash memory
  • Connectivity
    • WiFi 802.11 b / g / n.
      • Security WEP, WPA / WPA2 PSK / Enterprise.
      • Integrated cryptographic chip supporting AES / SHA2 / Elliptical Curve Cryptography / RSA-4096 algorithms
      • Maximum power for data transfer: 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n
      • Sensitivity max. reception: -97 dBm
    • Bluetooth 4.0 LE
  • 32 Inputs / Outputs
    • 26x Digital I / O (3.3V). All outputs can be PWM
    • 18x analog inputs
    • 3x UART
    • 3x SPI
    • 2x I2S
    • 2x DAC
    • 2x I2C
  • Sleep Mode Consumption: 5 μA
  • Integrated sensors
    • Hall Effect
    • 10x inputs for capacitive touch interface
  • Operating Voltage: 3.3V
  • Battery Connector: PH-2 2.0mm