ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Linear Actuator Kit

από KITRONIK

Το Linear Actuator μετατρέπει την κυκλική κίνηση του σέρβο σε κίνηση ευθείας γραμμής. Ιδανικό για ρομπότ, γέφυρες ή στην αλλαγή γραμμών σε τρένα.

83-00002595
Ογκομετρικό βάρος: 0kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: KITRONIK
Part Number: KITRONIK-2595
Χώρα Προέλευσης: Ηνωμένο Βασίλειο
Διαθέσιμο
Αποστολή σε 24 ώρες
Διαθέσιμο στο φυσικό κατάστημα
8.40
Χωρίς ΦΠΑ 6.77
+

ΣΥΝΔΥΑΣΕ ΤΟ ΜΕ

ΠΕΡΙΓΡΑΦΗ

Our new Linear Actuator converts the circular movement of a 180 degree servo (supplied) into motion in a straight line, one way and then the other. It can be mounted to a project to provide either horizontal or vertical movement.

Linear Actuators are useful for a whole host of different applications, like; robots, automated button switching, steering racks for buggies, a point switcher on a model railway, animating a diorama display, etc. Linear actuators are also used extensively in industry and in consumer products, such as; valves, cams, floppy disk drives and optical disk drives, just to name a few.

An example of a fully assembled linear actuator being used with a servo:lite board and BBC microbit.

The Linear Actuator has been cut from a 5mm clear blue Perspex Sheet, the same material as used in our servo powered Klaw gripper. There are a range of mounting holes at either end of the rack including a 3mm hole, a 3mm square, and standard servo horn holes suitable for wire (1mm dia) and it has approximately 20mm of travel. It has a gear ratio of 2:3 and the stall torque of the provided servo is 1.5kg/cm at 6V and 1.3kg at 4.8V.

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

  • Linear Actuator Laser Cut Parts
  • 1x Micro 180 Degree Servo and fixings
  • 2x M3x 10 Pozi PanSteel M/C
  • 1x M3 Form A Steel Washer
  • Linear Actuator assembly Instructions

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Συμβατό Micro:bit:
  • V1
  • V2
Κατασκευαστής
:
KITRONIK
Part Number:
KITRONIK-2595
Μικτό Βάρος:
0.001kg
Χώρα Προέλευσης:
Ηνωμένο Βασίλειο
Servo Standar
:
25T (Futaba/Feetech)

ΔΥΝΑΤΟΤΗΤΕΣ

  • The Linear Actuator converts the circular movement of a 180 degree servo (supplied) into motion in a straight line.
  • It is supplied with a 180 degree FS90 servo and fixings.
  • Useful for a wide range of applications, such as; robotics, switching, animating displays and more.

ΑΡΧΕΙΑ