ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

CAN Bus Module - MCP2515

από OEM

Αυτό το CAN Bus Module βασίζεται στον ελεγκτή διαύλου CAN MCP2515 και τον πομποδέκτη CAN TJA1050. Με αυτό το module, θα μπορείτε εύκολα να ελέγξετε οποιαδήποτε συσκευή διαύλου CAN μέσω διεπαφής SPI με το MCU σας, όπως το Arduino UNO κλπ.

19-00090183
Ογκομετρικό βάρος: 0kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: OEM
Χώρα Προέλευσης: Κίνα
Διαθέσιμο
Αποστολή σε 24 ώρες
Διαθέσιμο στο φυσικό κατάστημα
4.80
Χωρίς ΦΠΑ 3.87
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 10+ 100+
Τιμή 3.84 3.36

ΠΕΡΙΓΡΑΦΗ

This CAN Bus Module based on the CAN bus controller MCP2515 and CAN transceiver TJA1050. With this module, you will easy to control any CAN Bus device by SPI interface with your MCU, such as Arduino UNO and so on.

Can-bus is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This can-bus module adopts mcp2515 can bus controller with spi interface and tja1050 can bus transceiver to give your controller such as arduino can-bus capability.

For those who want to learn can bus, this module is your choice to step into the can bus world, at least 2 pcs of can-bus module are need to finish the can bus communication.

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
OEM
Μικτό Βάρος:
0.001kg
Χώρα Προέλευσης:
Κίνα

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Support CAN V2.0B
  • Communication rate up to 1Mb/S
  • Working Voltage: 5V
  • Working Current: 5mA
  • Interface: SPI
  • Pinout:
    • VCC :5V power input pin
    • GND : power ground pin
    • CS : SPI SLAVE select pin (Active low)
    • SO : SPI master input slave output lead
    • SI : SPI master output slave input lead
    • SCLK: SPI clock pin
    • INT: MCP2515 interrupt pin

ΔΥΝΑΤΟΤΗΤΕΣ

  • Support CAN 2.0B protocol
  • Use High-speed CAN transceiver TJA1050
  • SPI control for expand Multi CAN bus interface
  • Use serial port could view the communication data
  • With independent key, LED indicator, Power indicator
  • With power pin

ΠΡΟΤΕΙΝΟΥΜΕ ΕΠΙΣΗΣ