ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Solar Battery Charger Regulator 10A - Dual USB

από OEM
Αυτός ο ελεγκτής ηλιακής φόρτισης είναι ένα είδος έξυπνου, πολυλειτουργικού ελεγκτή φόρτισης και εκφόρτισης. Όλες οι παράμετροι ελέγχου μπορούν να ρυθμιστούν με ευκολία για να ικανοποιήσουν ανάλογα με τις ανάγκες σας. Τα ηλεκτρονικά κυκλώματα του ελεγκτή προστατεύονται με υδατοστεγή επικάλυψη για την ελαχιστοποίηση των ζημιών από υγρασία και από τα έντομα που φωλιάζουν. Ο ηλιακός ελεγκτής είναι πλήρως αυτόματος και δεν απαιτεί περίπλοκες ρυθμίσεις ή επιλογές από τον χρήστη.
19-00019844
Ογκομετρικό βάρος: 0.15kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: OEM
Χώρα Προέλευσης: Κίνα
Εξαντλημένο
Το προϊόν δεν είναι διαθέσιμο
Χαμηλό απόθεμα στο κατάστημα
8.60
Χωρίς ΦΠΑ 6.94

Συναινώ ώστε η εταιρεία (GRobotronics) να προσθέσει την διεύθυνση ηλεκτρονικού μου ταχυδρομείου στην λίστα ώστε να λάβω ενημέρωση όταν το προϊόν θα είναι ξανά διαθέσιμο. Μόλις το προϊόν γίνει ξανά διαθέσιμο θα λάβω αυτόματα ενημέρωση στο email αυτό και αμέσως θα αφαιρεθεί από την συγκεκριμένη λίστα.

Το email σου θα χρησιμοποιηθεί αποκλειστικά για τον σκοπό αυτό και καμία άλλη ενημέρωση δεν θα λάβεις. Θα είναι ορατό μόνο από συγκεκριμένους εξουσιοδοτημένους υπαλλήλους της εταιρείας.

Έχετε το δικαίωμα σε περίπτωση κατά την οποία θεωρείτε ότι η επεξεργασία που γίνεται δεν είναι σύμφωνη με τα ανωτέρω να αναζητείτε την προστασία της Αρχής Προσωπικών Δεδομένων και να ζητήσεις να διαγράψουμε ή να μεταβάλλουμε τα δεδομένα σου. Είμαστε υποχρεωμένοι σύμφωνα με τον κανονισμό της ΕΕ για την Προστασία των Γενικών Προσωπικών Δεδομένων να σε ενημερώσουμε για αυτό το δικαίωμα. Έχετε την δυνατότητα να επικοινωνείτε όποτε επιθυμείτε με την εταιρεία ώστε να ενημερωνόσαστε σχετικά με τα προσωπικά σας δεδομένα στο email [email protected]

ΑΓΑΠΗΜΕΝΑ ΣΥΓΚΡΙΣΗ

ΠΕΡΙΓΡΑΦΗ

This series solar charge controller is a kind of intelligent, multi-functional solar charge and discharge controller. All the controlling parameters can be reset flexibly to satisfy your different needs. Solar controller has specifically designed to meet the needs of the rural electrification market. The low cost resulted from using the latest electronic technology and high volume manufacturing.

We are reputable trader of solar charge controllers,power inverters,and solar power systems. All our products are designed for high quality and high reliability. The controller has a low failure rate and will last a long time. The solar controllers are built-in electronic fused that do not require replacements. The solar controlers electronics are protected with moisture-tight coating, minimizing damage from humidity and from nesting insects. Solar controller is fully automatic and requires no adjustments or user selections.

  • Visual LCD graphic symbol, brief key operation.
  • Build-in industrial micro controller.
  • Automatic identification system voltage level, intelligent PWM charge mode.
  • Adjustable charge/discharge control parameters, settable operating modes of loads.
  • Build-in short-circuit protections, open-circuit protections, reverse protections, over-load protections.
  • Dual mosfet Reverse current protections ,low heat productions. 
  • Over-load and short-circuit protection.
  • With dual USB 5V output. 

 

ΣΗΜΕΙΩΣΕΙΣ

  • The function of the controller is to protect the voltage overshoot and discharge.
  • When the battery voltage is too low, the controller to stop output; after the solar panels charging, the battery will return to 12.6 v. It is a natural to output.
  • 12.6 v is to restore the discharge voltage.
  • When the solar panels to recharge battery float charging voltage can be achieved. It will stop charging. This is called overshoot protection.
  • After the battery discharge, the battery outside will flash, this is to remind the user, the configuration is not reasonable, it need to take battery connection.
  • The controller normal voltage of 10.8 v to 13.7v. This two voltage fluctuation, you can be set manually.

Safety Instructions:

  • Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
  • The battery cable should be as short as possible to minimize loss.
  • The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL it is not suited for nickel metal hydride, lithium ions or other batteries.
  • The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
OEM
Μικτό Βάρος:
0.15kg
Χώρα Προέλευσης:
Κίνα

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Color: Black, Blue
  • Material: Plastic
  • Max. Charge/Discharge Current: 10A
  • Max. Solar Panel Input Voltage: ≤50V
  • Rated Voltage: 12V / 24V Auto
  • Only For off-Grid PV Solar System.
  • For 10A 12V Pv System:
    • 120W Solar Panel
    • 12V Lead-acid Battery
    • 21V for Max input Voltage
  • For 10A 24V Pv System:
    • 240W Solar Panel
    • 24V Lead-acid Battery
    • 42V for Max input Voltage 
  • USB Output Voltage/Current: Dual 5V 2A
  • No Load Loss: ≤10mA
  • Temperature Compensation: -3mV/Cell/°C
  • Operation Temperature: -20°C~60°C
  • Item Size: 133.2x69.8x33.5mm
  • Item Weight: 119g~152g

ΔΥΝΑΤΟΤΗΤΕΣ

  • 12V/24V, the power rate is conveniently adjustable with the dual USB port on the front of the regulator.
  • This Solar Panel Regulator can be used with all systems that are supplied with solar energy and have requirements power EMI indicator.
  • This Solar Charge Controller can monitor the real-time currency, volt and electricity output volume statistics. Everything can conveniently be read from the LCD display screen.
  • This regulator features excellent heat balance design and natural air cooling. Furthermore the temperature compensation feature automatically adjusts the charge parameters by temperature.
  • The thought through charge loop can improve the efficiency of charge and discharge and reduce the heat consumption.

ΑΡΧΕΙΑ