ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Colorful TFT Display 3.5" - Touch Screen - TFT35-E3 V3.0

από BIQU

Η BIGTREETECH TFT35-E3 V3.0 είναι μια μεσαίου μεγέθους οθόνη για 3D εκτυπωτή, με διπλή λειτουργία, εξαιρετικά καθαρή με μεγάλη ευκρίνεια που κυκλοφόρησε από την ομάδα εκτύπωσης 3D της Shenzhen BIGTREE Technology CO., LTD., η οποία μπορεί να αντικαταστήσει τέλεια την αρχική οθόνη LCD του εκτυπωτή Creality Ender-3.

59-00018837
Ογκομετρικό βάρος: 0.18kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: BIQU
Χώρα Προέλευσης: Κίνα
Διαθέσιμο
Αποστολή σε 24 ώρες
Χαμηλό απόθεμα στο κατάστημα
49.90
Χωρίς ΦΠΑ 40.24
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 10+
Τιμή 44.91

ΠΕΡΙΓΡΑΦΗ

BIGTREETECH TFT35-E3 V3.0 is a medium size, dual-mode, ultra-clear 3D printing machine display launched by the 3D printing team of Shenzhen BIGTREE Technology CO., LTD., which can perfectly replace the original LCD screen of Ender3 printer.

This board can replace the original LCD screen of Ender3 printer.

Product Advantages

  1. ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz
  2. Upgrade the firmware by SD card. It is easy and convenient to operate.
  3. This display board has higher compatibility. Users can select two work modes: UART serial port screen mode and 12864 screen mode.
  4. Serial port screen mode supports two printing modes: SD card and U disk.
  5. Reserve WIFI port, and WIFI function is realized by external WIFI module
  6. Reserve the extension port of filament breaking detection (FIL-DET)
  7. Reserve the extension port of automatic shutdown after printing (PS-ON)
  8. LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
  9. TFT touch screen mode:serial port screen RS232 port; 10)2 sets of UART serial port extension ports are reserved for DIY use.

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
BIQU
Μικτό Βάρος:
0.18kg
Χώρα Προέλευσης:
Κίνα

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Working Mode:
    • Touch screen mode
    • 12864LCD mode
  • Appearance Size: 93x87mm
  • Installation Size: Perfectly replace the original LCD screen of Ender3 printer
  • Microprocessor: STM32F207VCT6
  • Power Input: DC 5V
  • SD Card Logic Voltage: 3.3V and 5V
  • Application Use For: SKR MINI E3, SKR V1.3, SKR PRO, etc
  • Support Printing Mode: SD Card and USB Flash Drive

ΑΡΧΕΙΑ

ΒΙΝΤΕΟ

BTT TFT35-E3 V3.0,perfect upgrade Ender 3 original LCD.