ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Waveshare UPS HAT

από WAVESHARE
Uninterruptible Power Supply For Raspberry Pi Power Your Pi Seamlessly From Power Connection OR The Backup Batteries Charge and Power Output at the Same...
31-00018306
Ογκομετρικό βάρος: 0.16kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: WAVESHARE
Part Number: WHS18306
Χώρα Προέλευσης: Κίνα
Διαθέσιμο
Αποστολή σε 24 ώρες
Χωρίς απόθεμα στο φυσικό κατάστημα
24.80
Χωρίς ΦΠΑ 20.00
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 10+
Τιμή 22.32

ΠΕΡΙΓΡΑΦΗ

Uninterruptible Power Supply For Raspberry Pi
Power Your Pi Seamlessly From Power Connection OR The Backup Batteries
Charge and Power Output at the Same Time

Features At A Glance

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
  • Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
  • Onboard 5V regulator, up to 2.5A continuous output current
  • 5V USB output, convenient for powering other boards
  • Batteries warning indicators, easy to check if the battery is connected correctly
  • Comes with development resources and manual

Uninterruptible Power

It is able to charge the batteries and provide power output at the same time from external power supply. Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble.

Designed For Raspberry Pi Series

Standard Raspberry Pi 40PIN GPIO Header, Customized For Raspberry Pi Series Boards

Real Time Monitoring

Monitoring The Batteries Voltage, Current, Power, And Remaining Capacity. When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss.

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

  1. UPS HAT x1
  2. 8.4V battery charger x1
  3. 2×20PIN female header x1
  4. RPi screws pack (2pcs) x1
1234

Safe And Stable Circuit Design

Protection Circuits For Over Charge/Discharge, Over Current, Short Circuit, And Reverse. Along With The Equalizing Charge Feature, More Safe And Stable.

5V USB Output As Well

Convenient For Powering Other Boards.

Battery Warning Indicators

Easy To Check If The Battery Is Connected Correctly.

Pinout Definition

ΣΗΜΕΙΩΣΕΙΣ

  • The 18650 batteries are NOT included
  • Please note that the battery length SHOULD be less than 67mm, some batteries with protection plate in the market are NOT supported, learn more

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Τύπος HAT:
  • Power Supply
Κατασκευαστής
:
WAVESHARE
Part Number:
WHS18306
Μικτό Βάρος:
0.157kg
Χώρα Προέλευσης:
Κίνα
Συμβατό Raspberry:
  • Model 4 B
  • Model 3 B+
  • Model 3 B
  • Model 3 A+
  • Zero
  • Zero W

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Output Voltage: 5V
  • Charger: 8.4V 2A
  • Control Bus: I2C
  • Dimensions: 56x85mm
  • Battery Surrort: 18650 Li battery (NOT included)
  • Mounting Hole Size: 3.0mm

ΑΡΧΕΙΑ