ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Display 1.14" 240x135 IPS, SPI interface

από WAVESHARE
Πρόκειται για μία LCD οθόνη με IPS πάνελ, με διαγώνιο 1.14" και ανάλυση 240x135, 65K χρώματα, με ενσωματωμένο Driver ST7789 και επικοινωνία μέσω διεπαφής SPI.
31-00018231
Ογκομετρικό βάρος: 0.02kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: WAVESHARE
Part Number: 1.14inch LCD Module
Χώρα Προέλευσης: Κίνα
Διαθέσιμο
Αποστολή σε 24 ώρες
Διαθέσιμο στο φυσικό κατάστημα
9.90
Χωρίς ΦΠΑ 7.98
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 10+
Τιμή 8.91

ΠΕΡΙΓΡΑΦΗ

1.14inch LCD Display Module, IPS Screen, 65K RGB Colors, 240×135 Resolution, SPI Interface

Embedded ST7789 Driver, Using SPI Bus

Comes with examples for Raspberry Pi, Arduino, STM32, etc.

Features At A Glance

  • 240x135 resolution, 65K RGB colors, clear and colorful displaying effect
  • SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32
  • Comes with development resources (examples for Raspberry Pi/Arduino/STM32) 

 

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

  1. 1.14inch LCD Module x1
  2. PH2.0 8PIN 20cm cable x1
12
Hardware Connection

Connecting With Raspberry Pi

Connecting With Arduino Board

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
WAVESHARE
Part Number:
1.14inch LCD Module
Μικτό Βάρος:
0.023kg
Χώρα Προέλευσης:
Κίνα
Τάση Λειτουργίας:
3.3VDC
Τάση Εισόδου:
3.3 or 5VDC
Διασύνδεση:
  • Digital
Τύπος:
IPS LCD
Μέγεθος Οθόνης:
1.14"
Αναλογία Οθόνης:
  • 16:9
Χρώματα Οθόνης:
Colorful
Οθόνη Aφής:
Όχι
Διασύνδεση:
  • SPI

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Oparating Voltage: 3.3V/5V 
  • Communication Interface: 4-wire SPI 
  • Display Panel: IPS 
  • Driver: ST7789 
  • Resolution: 240x135 pixels
  • Display Size: 24.91x14.86mm
  • Pixel Size: 0.1101x0.1035mm
  • Dimensions: 35.00x32.00mm

 

Controlled Via SPI Bus

Supports Controller Boards Like Raspberry Pi/Arduino/STM32

VCC Power (3.3V/5V input)
GND Ground
DIN SPI data input
CLK SPI clock input
CS Chip selection, low active
DC Data/Command selection (high for data, low for command)
RST Reset, low active
BL Backlight