ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Picade PCB - 3W Amplifier & Arcade Board (ATmega32U4)

από PIMORONI
Το Pimoroni Picade Controller PCB είναι μια συμβατή με Arduino πλακέτα με ενσωματωμένο στερεοφωνικό ενισχυτή 3W που έχει σχεδιαστεί για χρήση σε Arcade έργα (όπως το Picade Cabinet ή Picade Console Controller). Βασικά είναι όλα όσα χρειάζεστε για να φτιάξετε ένα Pi έτοιμο για το δικό σας έργο κονσόλας arcade DIY.
13-00044999
Ογκομετρικό βάρος: 0.03kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: PIMORONI
Part Number: PIM110
Χώρα Προέλευσης: Ηνωμένο Βασίλειο
Διαθέσιμο
Αποστολή σε 24 ώρες
Χωρίς απόθεμα στο φυσικό κατάστημα
29.90
Χωρίς ΦΠΑ 24.11
+

ΠΕΡΙΓΡΑΦΗ

The Pimoroni Picade Controller PCB is an Arduino-compatible board with an integrated 3W stereo amplifier designed for use in arcade projects (like the Picade Cabinet or Picade Console Controller). Basically its everything-you-need to make a Pi ready for your very own DIY arcade console project.

The controller comes fully assembled and behaves like a keyboard when plugged in via USB and has a default key-mapping (though you can reprogram it using the Arduino IDE). Connections are made using screw terminals for a solid, permanent installation.

It uses the same micro-controller as the Arduino Leonardo (the ATmega32U4) and is pre-installed with the Arduino bootloader and Pimoroni software.

 

ΣΗΜΕΙΩΣΕΙΣ

  • PCBs may come blue or red which is out of our control. Functionally they're the same!

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
PIMORONI
Part Number:
PIM110
Μικτό Βάρος:
0.03kg
Χώρα Προέλευσης:
Ηνωμένο Βασίλειο
Είδος Εξαρτήματος:
Ελεγκτής

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Powered by an ATmega32U4 (32KB, 2.5K RAM @ 16MHz)
  • 6-pin ISP header for direct programming (also pre-loaded with Arduino bootloader)
  • Includes a stereo 3W amplifier (PAM8407) for use with 4Ω speakers
  • Appears as a USB HID device (keyboard) to the host
  • Screw terminal contacts for four-direction Joystick, 12 buttons, and two speakers
  • Reset button
  • Mounting holes
  • Power, Bootload, TX, and RX LED indicators
  • Mounting Hole Distances: 59.4x49.3mm
  • Dimensions: 75.4x60.1x12.1mm
  • Weight: 27.5g