ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Waveshare NB-IoT HAT Based on SIM7020E

από WAVESHARE
This is an NB-IoT (NarrowBand-Internet of Things) HAT for Raspberry Pi, controlled via serial AT commands, supports communication protocols like...
31-00015936
Ογκομετρικό βάρος: 0.11kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: WAVESHARE
Part Number: 15936
Χώρα Προέλευσης: Κίνα
Διαθέσιμο
Αποστολή σε 24 ώρες
Χωρίς απόθεμα στο φυσικό κατάστημα
22.90
Χωρίς ΦΠΑ 18.47
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 10+
Τιμή 21.75

ΠΕΡΙΓΡΑΦΗ

This is an NB-IoT (NarrowBand-Internet of Things) HAT for Raspberry Pi, controlled via serial AT commands, supports communication protocols like LWM2M/COAP/MQTT, etc. Due to the advantages of low delay, low power, low cost, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, and so on.

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

  1. SIM7020E NB-IoT HAT x1
  2. Antenna x1
  3. USB type A plug to micro plug cable x1
  4. RPi screws pack (2pcs) x1

1234

 

ΣΗΜΕΙΩΣΕΙΣ

  • The Raspberry Pi is NOT included.
  • SIM7020E is mainly applicable in Europe, Asia, Africa, Australia.

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Τύπος HAT:
  • Wireless Communication
Κατασκευαστής
:
WAVESHARE
Part Number:
15936
Μικτό Βάρος:
0.11kg
Χώρα Προέλευσης:
Κίνα
Συμβατό Raspberry:
  • Model 4 B
  • Model 3 B+
  • Model 3 B
  • Model 3 A+
  • Model 2 B
  • Zero
  • Zero W

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

General Specifications:

  • Power supply: 5V
  • Logic level: 5V/3.3V (3.3V by default)
  • Overall current (idle mode): ~18mA
  • Single module current (VBAT=3.3V):
    • Idle mode: 5.6mA
    • Sleep mode: 0.4mA
    • PSM mode: 5uA
    • eDRX mode: 70uA (eDRX=655.36s)
  • Dimension: 30.5x65.0mm

Communications Specifications:

  • Band
    • FDD-LTE B1/B3/B5/B8/B20/B28 
  • Data rate
    • Uplink≤62.5Kbps
    • Downlink≤26.15Kbps
  • SMS
    • Text mode and PDU mode (depends on the NB card)

ΔΥΝΑΤΟΤΗΤΕΣ

  • Raspberry Pi connectivity, compatible with any revision
  • Supports communication protocols such as LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS, etc.
  • Onboard USB interface, for power supply OR debugging
  • Breakout UART control pins, to connect with host boards like Arduino/STM32
  • Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper
  • SIM card slot, supports NB-IoT specific card
  • 2x LED indicators, easy to monitor the working status
  • Baudrate: 300bps~921600bps (115200bps by default)
  • Control via AT commands (V.25TER, 3GPP TS 27.007, and SIMCOM AT Commands)
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32/Python)