ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Kitronik 555 Timer Astable (Tone Generator) Kit

από KITRONIK
The 555 Timer Astable (Tone Generator) Kit produces a square wave output. The frequency of which is adjustable via the variable resistor.
83-00002117
Ογκομετρικό βάρος: 0kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: KITRONIK
Part Number: KITRONIK-2117
Χώρα Προέλευσης: Ηνωμένο Βασίλειο
Διαθέσιμο
Αποστολή σε 24 ώρες
Χωρίς απόθεμα στο φυσικό κατάστημα
4.50
Χωρίς ΦΠΑ 3.63
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 10+
Τιμή 4.05

ΠΕΡΙΓΡΑΦΗ

The 555 Timer Astable (Tone Generator) Kit produces a square wave output. The frequency of which is adjustable via the variable resistor.

This kit is perfect for GCSE students needing to use a 555 timer in its astable mode, where it produces a square wave output. The frequency of which is adjustable via the variable resistor. The board has a choice of two outputs. The logic output can be used to drive another IC or a speaker can be connected so the tone is heard (e.g. a door bell).

The push button switch connects to the reset line such that the IC is only active when the button is pressed.

Note: This kit requires soldering.

Features:

  • The 555 Timer Astable (Tone Generator) Kit produces a square wave output.
  • The frequency of the aquare wave is adjustable via the variable resistor.

Contents:

  • 1 x 555 Timer IC
  • 1 x 8 Pin IC Holder
  • 1 x 3.3KΩ Resistor
  • 1 x 10KΩ Resistor
  • 1 x 47KΩ Potentiometer
  • 2 x 10nF Ceramic Capacitors
  • 1 x BC547 NPN Transistor
  • 1 x Push To Make Switch
  • 1 x PP3 Clip Lead
  • 1 x 3AA Battery Holder
  • 0.5m Connecting Wire
  • 1 x Tone Generator PCB

Dimensions: PCB Length: 40mm x 40mm

Requires:

Resources:

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
KITRONIK
Part Number:
KITRONIK-2117
Μικτό Βάρος:
0.001kg
Χώρα Προέλευσης:
Ηνωμένο Βασίλειο