Kitronik High Power Amp Kit (PCB & Components)
διαθέσιμο για online αγορά
The High Power Amp Kit can output up to 15W per channel. It includes all of the components required to build the PCB. PSU, speakers and cable are not included.
This amplifier kit can output up to 15W per channel into a pair of high quality speakers. The kit is capable of producing a very loud, high quality stereo sound. The product includes all the components required to build the PCB, but not a power supply, speakers or cable to connect it to audio equipment.
It features a power LED, on / off switch and volume control.
Note: This kit requires soldering.
Note: The heat sink will become hot when the amplifier is used at a high volume for long periods of time. For the heat sink to work at its best it should be mounted in a well ventilated case.
This kit includes:
- 1 x Printed circuit board
- 1 x TDA7297 audio amplifier IC
- 1 x Heat sink
- 1 x M3 nut and bolt
- 1 x 10Kohm dual potentiometer
- 2 x 47Kohm resistors
- 1 x 1Kohm resistor
- 1 x 1N5400 diode
- 1 x Blue LED
- 1 x 470uF capacitor, electrolytic
- 1 x 10uF capacitor, electrolytic
- 1 x 100nF capacitor, ceramic disc
- 2 x 220nF capacitor, ceramic disc
- 1 x Right angle PCB mounting power switch (high current)
- 3 x Two way terminal blocks
- 1 x Panel mounting DC power socket
You may also wish to buy some of the following items:
Dimensions: 77.5mm x 59mm. Four mounting points are available, one in each corner.