ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

PrimaSelect ABS+ Filament - 2.85mm - 750g spool - Black

από PRIMACREATOR
PrimaSELECT™ABS+ is the next generation of ABS filament. With this filament you will experience far less warping and cracking.
26-00021717
Ογκομετρικό βάρος: 1.14kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: PRIMACREATOR
Part Number: PS-ABSP-285-0750-BK
Χώρα Προέλευσης: ΕΕ
Εξαντλημένο
Το προϊόν δεν είναι διαθέσιμο
Χωρίς απόθεμα στο φυσικό κατάστημα
Από 39.90
19.95
Χωρίς ΦΠΑ 16.09
Κέρδος: 19.95 (50%)
Σε Προσφορά

Συναινώ ώστε η εταιρεία (GRobotronics) να προσθέσει την διεύθυνση ηλεκτρονικού μου ταχυδρομείου στην λίστα ώστε να λάβω ενημέρωση όταν το προϊόν θα είναι ξανά διαθέσιμο. Μόλις το προϊόν γίνει ξανά διαθέσιμο θα λάβω αυτόματα ενημέρωση στο email αυτό και αμέσως θα αφαιρεθεί από την συγκεκριμένη λίστα.

Το email σου θα χρησιμοποιηθεί αποκλειστικά για τον σκοπό αυτό και καμία άλλη ενημέρωση δεν θα λάβεις. Θα είναι ορατό μόνο από συγκεκριμένους εξουσιοδοτημένους υπαλλήλους της εταιρείας.

Έχετε το δικαίωμα σε περίπτωση κατά την οποία θεωρείτε ότι η επεξεργασία που γίνεται δεν είναι σύμφωνη με τα ανωτέρω να αναζητείτε την προστασία της Αρχής Προσωπικών Δεδομένων και να ζητήσεις να διαγράψουμε ή να μεταβάλλουμε τα δεδομένα σου. Είμαστε υποχρεωμένοι σύμφωνα με τον κανονισμό της ΕΕ για την Προστασία των Γενικών Προσωπικών Δεδομένων να σε ενημερώσουμε για αυτό το δικαίωμα. Έχετε την δυνατότητα να επικοινωνείτε όποτε επιθυμείτε με την εταιρεία ώστε να ενημερωνόσαστε σχετικά με τα προσωπικά σας δεδομένα στο email [email protected]

ΑΓΑΠΗΜΕΝΑ ΣΥΓΚΡΙΣΗ

ΠΕΡΙΓΡΑΦΗ

PrimaSELECT™ABS+ is the next generation of ABS filament. With this filament you will experience far less warping and cracking. You will also discover that PrimaSELECT™ABS+ has a near perfect layer adhesion which, of course, leads to more beautiful prints. The mechanical properties are also enhanced to make PrimaSELECT™ABS+ extra strong. This filament is the perfect choice when you are looking to print objects that requires high strength and very high impact tolerance.

PrimaSELECT™ABS+ (Acrylonitrile Butadiene Styrene) is a material that is widely used in both industry and as filament for 3D Printers. It´s strong, light weight and very durable. The well-known Lego blocks are made from ABS and as you know that is a very high impact resistant piece of plastic. PrimaSELECT™ABS+ is even betterthan that.

PrimaSELECT™ABS+ is a very "easy to use" material it prints almost like PLA and has a matt surface finish on your printed object. PrimaSELECT™ABS+ also has limited risk of warping when comparing to other brands of ABS. PrimaSELECT™ABS+ comes in a selected range of vivid colors that are all based on the RAL color system which in turns guarantees that you will get the same color every time you order a new spool.

With PrimaSELECT™ABS+ we have succeeded in making an ABS that are very easy to print with and gives you stunning result every time. This filament has a very high impact strength and are perfect for printing tools, toys and different utensils. Thanks to the relative high melting temperature PrimaSELECT™ABS+ is also suitable for prints that are going to be used in hot environments. When printing with PrimaSELECT™ABS+ you can use a slightly higher print temperature then average ABS to get an even stronger result. The special properties ofPrimaSELECT™ABS+ makes it the best ABS replacement in our range. Now you don´t have to worry about the problems that you likely are used to with common ABS. Massive warping, cracked prints and horrible bed adhesion are now a thing of the past.

If you have a dual hot-end set up and are going to print with support we recommend that you usePrimaSELECT™PVA that bonds well to our ABS and are easy to remove, PrimaSELECT™PVA is even soluble in water.

When printing with PrimaSELECT™ABS+ we recommend that you use a heated bed. Set your heat bed to ± 80-90˚C for best results.

PrimaSELECT™ABS+ sticks on BuildTak or glass plate coated with adhesive spray or glue stick.

PrimaSELECT™ABS+ is reeled on a transparent spool with 750 g of high quality filament. It´s packed in a sturdy box and packed with silica gel to avoid moister.

PrimaSELECT™ABS+ are available in diameter sizes of 1.75 mm and 2.85 mm.

Our state of the art factory is equipped with the latest in laser measuring technology to ensure that you will receive a spool of filament with a very tight diameter and roundness tolerance. This in turn makes for a filament that is compatible with most common printers on the market today.

Specifications:

  • Manufacturer PrimaFilaments
  • Material ABS+
  • Diameter 1.75 mm
  • Tolerance ± 0.05 mm
  • Weight filament 750 g
  • Spoll size 200 mm x 55 mm
  • Spool hub diameter 53 mm

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
PRIMACREATOR
Part Number:
PS-ABSP-285-0750-BK
Μικτό Βάρος:
1.14kg
Χώρα Προέλευσης:
ΕΕ
Διάμετρος νήματος:
2.85 / 3mm
Ρολό:
  • 0.750kg
Τύπος νήματος
:
  • ABS
Χρώμα:
Μαύρο