ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

PrimaSelect CARBON Filament - 1.75mm - 500g spool - Grey

από PRIMACREATOR
PrimaSELECT™Carbon is the latest generation of high performance material for your 3D Printer. OurPrimaSELECT™Carbon is based on PETG and is reinforced with 20% carbon fibers.
26-00021728
Ογκομετρικό βάρος: 0.89kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: PRIMACREATOR
Part Number: PS-CB-175-0500-GY
Χώρα Προέλευσης: ΕΕ
Διαθέσιμο
Αποστολή σε 24 ώρες
Χωρίς απόθεμα στο φυσικό κατάστημα
39.90
Χωρίς ΦΠΑ 32.18
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 4+
Τιμή 37.90

ΠΕΡΙΓΡΑΦΗ

PrimaSELECTCarbon is the latest generation of high performance material for your 3D Printer. Our PrimaSELECTCarbon is based on PETG and is reinforced with 20% carbon fibers. This makes for an extremely tough filament that is perfect for printed parts that can be used in the automotive industry, drones and RC parts.

PrimaSELECTCarbon is a very useful material that has very unique properties. Mixed with small, chopped carbon fiber strands, PrimaSELECTCarbon filament offers incredible rigidity, structure, and great interlayer adhesion. Due to the fact that there´s a very low risk of warping, PrimaSELECTCarbon is very easy to print with and has a matt surface when done. The finished prints are very stiff and rigid and are very useful if you need an object with high stiffness to weight ratioPrimaSELECTCarbon doesn´t require a heated bed, but if you have one, set it to 35-60˚C to get a really good first layer adhesion.

Due to the abrasive nature of PrimaSELECTCarbon we recommend that you use a hardened steel nozzle for this filament. Using a regular brass nozzle isn´t a problem but it will wear out the nozzle in a short time.

PrimaSELECTCarbon sticks on BuildTak, Glass coated with adhesive spray or glue stick, painters tape coated with hairspray and has been used successfully with glue stick, 3DLac, DimaFix and Magigoo.

PrimaSELECTCarbon is reeled on a transparent spool with 500 g of high quality filament. It´s packed in a sturdy box and packed with silica gel to avoid moister.

PrimaSELECTCarbon sticks on BuildTak or glass plate coated with adhesive spray or glue stick.

PrimaSELECTCarbon are available in diameter sizes of 1.75 mm and 2.85 mm.

Our state of the art factory is equipped with the latest in laser measuring technology to ensure that you will receive a spool of filament with a very tight diameter and roundness tolerance. This in turn makes for a filament that is compatible with most common printers on the market today.

Why should I use PrimaSELECTCarbon?

  • Carbon reinforced PETG
  • Easy to use, no warping and very dimensionally stable.
  • Very good layer adhesion
  • High impact and heat resistance
  • No hazardous fumes

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
PRIMACREATOR
Part Number:
PS-CB-175-0500-GY
Μικτό Βάρος:
0.89kg
Χώρα Προέλευσης:
ΕΕ
Ανοχή:
±0,05mm
Διάμετρος νήματος:
1.75mm
Θερμοκρασία Εκτύπωσης:
240-260°C
Ρολό:
  • 0.500kg
Στρογγυλότητα:
≥ 95%
Τύπος νήματος
:
  • Carbon
Χρώμα:
  • Γκρι

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Heated build platform required: Recommended
  • Spool Size: 200x55mm
  • Spool Hub Diameter: 53mm
  • Recommended nozzle: 0.6mm hardened steel (minimum)