ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

SparkFun Αισθητήρας Ανίχνευσης Κίνησης

από Sparkfun
The SparkFun OpenPIR is a highly customizable Passive Infrared (PIR) sensor based around the NCS36000 PIR controller.
03-00013968
Ογκομετρικό βάρος: 0kg
Κατασκευαστής: Sparkfun
Part Number: SEN-13968
Χώρα Προέλευσης: ΗΠΑ
Κατόπιν Παραγγελίας
Παράδοση έως 30 ημέρες
Χωρίς απόθεμα στο φυσικό κατάστημα
21.00
Χωρίς ΦΠΑ 16.94
+

ΠΕΡΙΓΡΑΦΗ

The SparkFun OpenPIR is a highly customizable Passive Infrared (PIR) sensor based around the NCS36000 PIR controller. Passive infrared (PIR) sensors are able to detect motion in a small/local area –– they’re the sensor of choice in security systems, home automation and proximity-sensing applications. The OpenPIR allows you to set the sensitivity, trigger time and pulse mode of the motion sensor so you can tailor-fit it to your application!

The OpenPIR has a multitude of characteristics unique to itself, including two trimpots to adjust sensitivity (view distance) and the oscillator to control the length of time the output remains HIGH, as well as a trigger that supports two motion-detection modes: single-pulse and dual-pulse. Additionally, each OpenPIR is equipped with a reverse-entry green LED, which duplicates the status of the OUT pin. When motion is detected, the LED will illuminate; otherwise it will remain off.

The SparkFun OpenPIR supports a power supply range of 3VDC to 5.75VDC at 80µA standby (3mA when detecting motion) and is able to be connected via a standard 0.1" header or a 4-pin JST PH connector.

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Κατασκευαστής
:
Sparkfun
Part Number:
SEN-13968
Καθαρό Βάρος:
0.001kg
Χώρα Προέλευσης:
ΗΠΑ
Τύπος Αισθητήρα:
  • Κίνησης
Τυπική Τάση Εισόδου:
  • 3VDC
  • 3.3VDC
  • 5VDC
  • 5.5VDC
Ρεύμα Λειτουργίας:
3mA
Διασύνδεση:
  • Αναλογική
  • Ψηφιακή
Πρωτόκολλο Eπικοινωνίας:
  • Χωρίς

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Voltage Supply Range: 3VDC to 5.75VDC
  • Standby Average Current: 80µA
  • Motion-Detected Average Current: 3mA (LED enabled)
  • Integrated 2−Stage Amplifier
  • Internal LDO to Drive Sensor
  • Internal Oscillator with External RC
  • Single or Dual Pulse Detection