Tri-Color LED Breakout Kit

Κατασκευαστής: Sparkfun
Τιμή καταλόγου: 11.70
5.85 (με ΦΠΑ)

This is a simple kit that allows the use of very large, very bright, 10mm red/green/blue LEDs. We cannot begin to describe how bright these are when fully illuminated! After assembling the kit, you can control the LEDs via the RGB pins. By pulse-width-modulating the pins any color can be created by mixing different amounts of red, green, and blue. Running from a 5V source, these LEDs are painfully bright.

This board is designed to run off 5V and put the max 80mA through each LED. Be sure to pay attention to the different resistor values and LED colors. Each is marked clearly on the PCB. You will need a coin cell battery or multimeter to briefly illuminate the LEDs to tell what color they are before assembly.

Σημείωση: Although this board is pictured with pin headers, pin headers are not included in this kit. If you need some, however, they can be found in the related items below.


Κατασκευαστής :
Made in:

Δεν βρέθηκαν δημοσιεύσεις

Length Conversion

inch [in]:
millimeter [mm]:
centimeter [cm]:
meter [m]:
foot [ft]:
yard [yd]:


Weight Conversion

ounce [oz]:
pound [lb]:
gram [g]:
kilogram [kg]:


Torque Conversion

ounce-force inch []:
kilogram-force centimeter []:
newton centimeter []:
ounce-force foot [oz.ft]:
kilogram-force meter [kg.m]:
newton millimeter []:
newton meter [N.m]:
pound-force foot [lb.ft]:
pound-force inch []:


Current Conversion

milliampere [mA]:
kiloampere [kA]:
ampere [A]:


Angular Velocity Conversion

revolution/second [r/s]:
revolution/minute [r/min]:
revolution/hour [r/h]:
degree/second [°/s]:
degree/minute [°/min]:
Unit Converter
Οι φωτογραφίες των προϊόντων μπορεί να διαφέρουν απο την πραγματικότητα. Προσπαθούμε να παρουσιάσουμε το προϊόν όσο καλύτερα γίνεται.