Αρχική Σελίδα/Ρομποτική/BBC micro:bit/Micro:bit Add-ons/Kitronik :KLEF Piano for the BBC micro:bit

Kitronik :KLEF Piano for the BBC micro:bit

Κωδικός:

83-00005631

Part Number: KITRONIK-5631

ΚατασκευαστήςKitronik Part NumberKITRONIK-5631

Διαθέσιμο

Αποστολή σε 24 ώρες

€22⁹⁰

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά
Βίντεο

Compose a monophonic microbit musical masterpiece with the Kitronik :KLEF Piano for the BBC micro:bit. It features 15 capacitive touch pads, with 13 arranged as a single octave and 2 up down function buttons that can allow you to shift octaves.

:KLEF also features; an onboard amplifier circuit for extra 'more', an onboard speaker, and an onboard edge connector that the micro:bit slots into.

To use the Piano, the BBC micro:bit should be inserted firmly into the edge connector, either way around. If the Link Header is being used, the BBC micro:bit LED display should be facing the Piano keys. Kitronik has produced a MakeCode getting started guide which you can follow here.

Power is provided via a 5V micro USB connector. The board then produces a regulated 3.3V supply fed into the 3V and GND connections to power the connected BBC micro:bit, removing the need to power the BBC micro:bit separately. This also powers the capacitive touch sensor IC and audio amplifier.

The potential uses for the :KLEF Piano for the BBC micro:bit doesn't have to be just musical in nature. You can use the piano keys to transmit from the micro:bit attached to the board to other micro:bits over radio. And if that other microbit happened to be inserted into a :MOVE mini... Piano remote control! You can even take control of the :MOVE minis ZIP LEDs! Of course, we 'tested' this extensively.

Requires:

A BBC micro:bit.
A Micro USB Cable.

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

1x :KLEF Piano for the BBC micro:bit.

Dimensions:
- Length: 100mm
- Width: 110mm
- PCB Thickness: 1.6mm
- Max Height (No micro:bit): 17.3mm
- Max Height (With micro:bit): 53.3mm

Compose music using the micro:bit!
Learn to code and explore music at the same time.
Write code using the MakeCode, MicroPython, and Mu editors.

Use it as a control surface to trigger the sending of data via the microbits radio module.
Use it as a remote control for your Buggies/Robots.
It works with micro:bit V1 and micro:bit V2.