Αρχική Σελίδα/Ρομποτική/Arduino/Πλακέτες Επέκτασης για Arduino/Arduino® GIGA Display Shield

Arduino® GIGA Display Shield

Κωδικός:

02-00010197

Part Number: ASX00039

ΚατασκευαστήςArduino Part NumberASX00039

Διαθέσιμο

Αποστολή σε 24 ώρες

€79⁹⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€75.91

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

Introducing the GIGA Display Shield, a touch screen solution designed to effortlessly deploy graphic interfaces in your projects. Leveraging the new pin header connector in the middle of GIGA R1 WiFi, this shield offers seamless integration and enhanced functionalities.

With the GIGA Display Shield, you gain access to an array of features, including a digital microphone, 6-axis IMU, and Arducam connector. These added capabilities allow you to fully utilize the other 54 available pins, making it incredibly convenient to create handheld devices or dashboards to control your project.
Experience the convenience of building intuitive interfaces with ease, thanks to the GIGA Display Shield's user-friendly design and comprehensive features. Elevate your project's functionality and user experience with this cutting-edge solution.

The GIGA Display Shield has a 3.97” 480x800 RGB touch screen, a digital microphone, a 6-axis IMU and an RGB LED. The shield can easily be mounted on the GIGA R1 WiFi board.

Utilizing the GIGA R1 WiFi's fast 480 MHz microcontroller, you can build powerful UIs, use interactive 3D animations, display camera feed and much more. The shield is compatible with a wide range of graphics libraries, including LVGL, GFX and ArduinoGraphics.

Connectors
- Camera SOCKET 2ROW 20POS VERTICAL PASS THROUGH (Arducam compatible)
- Display Video F32Q-1A7H1-11020
- Display Touch F32Q-1A7H1-11008
Display
- Size 3.97”
- Resolution 480x800 RGB
- Color 16.7M
- Touch Mode Five points and Gestures
- Interface I2C
Sensors
- IMU BMI270
- Microphone MP34DT06JTR

FAQs

Is this display multitouch-enabled?
Yes, the display supports up to 5 simultaneous touch points.

How do I connect the GIGA Display Shield to the GIGA R1 WiFi?
The GIGA Display Shield connects via the middle headers (J5 and J6) on the GIGA R1 WiFi. Attach the shield from the bottom, leaving the top side of the GIGA R1 WiFi available for additional shields.

Will I still have access to all pins when the display is attached?
Yes, you will retain access to all pins on the top side of the board (54 pins) even when the display is connected.

Does the shield require an external power supply?
No, the GIGA Display Shield does not require an external power supply. It is powered directly through the connection.

Which cameras are compatible with the shield?
The GIGA Display Shield is fully compatible with 20-pin DVP cameras from Arducam, such as the OV7675. For more information, visit the Arducam catalog of compatible cameras.

Προτείνουμε επίσης

Arduino GIGA R1 WiFi

Κωδικός:

02-00010196

Διαθέσιμο

€89⁹⁰

+ −