Αρχική Σελίδα/Ρομποτική/Επικοινωνία/WiFi/Camera Module Based on ESP32 with ESP32-CAM-MB adapter

Camera Module Based on ESP32 with ESP32-CAM-MB adapter

Κωδικός:

31-00016613

Part Number: ESP32-CAM

Διαθέσιμο

Αποστολή σε 24 ώρες

€12⁸⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€11.52

+ −

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

The ESP32-CAM is a small size, low power consumption camera module based on ESP32. It comes with an OV2640 camera and provides onboard TF card slot.

The ESP32-CAM can be widely used in intelligent IoT applications such as wireless video monitoring, WiFi image upload, QR identification, and so on.

The ESP32-CAM suit for IOT applications such as:

When purchasing the ESP32-CAM with the MB Adapter the FTDI Module is not needed!
The connection to 5V is required for the programming.
Please make sure that the input power of the module is at least 5V 2A, otherwise the picture may have water lines.

Transmitting power:
- 802.11b: 17 ±2dBm(@11Mbps)
- 802.11g: 14 ±2dBm(@54Mbps)
- 802.11n: 13 ±2dBm(@HT20,MCS7)
Receiving sensitivity:
- CCK,1Mbps: -90 dBm
- CCK,11Mbps: -85 dBm
- 6Mbps(1/2 BPSK): -88 dBm
- 54Mbps(3/4 64-QAM): -70 dBm
- HT20,MCS7(65Mbps, 72.2Mbps): -67 dBm
Power consumption:
- Flash off: 180mA@5V
- Flash on and brightness max: 310mA@5V
- Deep-Sleep: as low as 6mA@5V
- Modern-Sleep: as low as 20mA@5V
- Light-Sleep: as low as 6.7mA@5V
Dimensions: 40.5mm x 27mm x 4.5mm

Supports WiFi video monitoring and WiFi image upload
Supports multi sleep modes, deep sleep current as low as 6mA
Control interface is accessible via pinheader, easy to be integrated and embedded into user products