Αρχική Σελίδα/3D Εκτύπωση/Αξεσουαρ & Εργαλεία/Χρήσιμα Εργαλεία/Creality Space Pi Plus - Filament Dry Box

Creality Space Pi Plus - Filament Dry Box

Κωδικός:

26-00016207

Part Number: 4005010071

ΚατασκευαστήςCreality Part Number4005010071

Διαθέσιμο

Αποστολή σε 24 ώρες

€89⁹⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€71.92

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

Wet 3D printing filament can result in stringing, clogging, poor adhesion, and layer shifting. The Creality Space Pi Filament Dryer Plus solves these issues by drying the filament during the printing process itself, enhancing your 3D model quality and minimizing the influence of external environmental factors on the printing of 3D filaments.

Two Rolls Capacity Design

The dryer can support 2 rolls of 1 kg filaments and is also equipped with 4 filaments holes and PTFE pipes to meet the needs of users drying a wide range of filaments as well as 2 printers at the same time.

Double PTC 360° Hot-air Heating

The dryer quickly heats with a built-in fan, circulating hot air 360° for uniform heating, effectively drying moisture filaments and improving printing results.

Advanced PTC Heating Technology

The Space Pi Filament Dryer Plus employs a unique 110W PTC heater to warm up the space, a feature that sets us apart in the market. Unlike most filament dryers that use a PI heating pad and often result in uneven drying, this model with the PTC heater ensures uniform drying. This PTC heater is not only durable and energy-saving, but also eco-friendly.

LCD Touch Screen

The Creality Space Pi Filament Dryer Plus comes with a 4-inch touch screen for easy operation, making it simple for you to track drying conditions.

One-key Set for 12 Filaments

It has one-key temperature settings for different filament types, supporting up to 12 types of filaments, including common and high-performance composite like PLA-CF, PA, ASA. Of course, you can also freely adjust the temperature between 45°C and 70°C.

48 Hours Timer Function

The heating duration can be freely set from 0-48 hours, allowing the filaments to be fully dried for better printing results.

Parameter Power-off Memory Function

After a power outage, the machine can restart and still remember your previous material and temperature settings, eliminating the need for resetting and allowing for quick drying.