>>> Θέσεις εργασίας <<<

 
+302118004320
English (GB)
0Cart

Battery Holder

Arduino 9V Jack adapter
19-00019518
This simple cable has so many uses! Plug the 9 volt battery clip onto a standard 9V battery and connect the other end to anything with a 5.5x2.1mm, center-positive barrel jack.
Battery Type6F22 - 9V Type of connection cableDC 5.5/2.1mm Outer insulation materialPVC
€080
In Stock
+ −
Electro-Fashion Switched Coin Cell Holder
83-00002711
This specially designed e-textiles coin cell holder from Kitronik has large connection points for the conductive thread. These are clearly marked to show the battery polarity. The unit also has a small power switch so that you can turn the power on and off. It uses a very thin PCB material...
Battery TypeCR2032 CompanyKitronik Part NumberKITRONIK-2711
€300
In Stock
+ −
Electro-Fashion Light Sensing Coin Cell Holder
83-00002721
This board allows LEDs to be turned on automatically when it is dark. On one side of the board is the coin cell holder, which takes a  CR2032   coin cell as well as a small on-off slide switch. On the other side of the board is the light sensor. This design means that it is possible to cut a...
Battery TypeCR2032 CompanyKitronik Part NumberKITRONIK-2721
€540
In Stock
+ −
Battery Holder 1x23A - with Wires
19-00011008
Battery TypeA23 - 12V Battery Slots1 CompanyOEM
€040
In Stock
+ −
Battery Bracket - 1x 18650
39-00013241
The Li-Ion Battery Holder 18650 in black plastic, which sits precisely on the diameter of the cell. Multiple pieces can be assembled in any shape of the battery assembly thanks to the snap system. Advantage: Can be conbined to any shape you need. High temperature resistance...
Battery Type18650 CompanyOEM G. Weight0.004 kg
€015
In Stock
+ −
Battery Holder 1x9V - Drawer
05-00071846
Battery Type6F22 - 9V Battery Slots1 CompanyBulgin
€700
In Stock
+ −
Battery Bracket - 2x3 18650
19-00014993
The Li-Ion Battery Holder 2x3 18650 in black plastic, which sits precisely on the diameter of the cell. Multiple pieces can be assembled in any shape of the battery assembly thanks to the snap system. Advantage: Can be conbined to any shape you need. High temperature...
Battery Type18650 CompanyOEM G. Weight0.002 kg
€040
In Stock
+ −
Battery Bracket - 2x 21700
19-00014995
The Li-Ion Battery Holder 2x 21700 in black plastic, which sits precisely on the diameter of the cell. Multiple pieces can be assembled in any shape of the battery assembly thanks to the snap system. Advantage: Can be conbined to any shape you need. High temperature...
Battery Type21700 CompanyOEM G. Weight0.002 kg
€050
In Stock
+ −
Battery Bracket - 2x 26650
19-00014994
The Li-Ion Battery Holder 2x 26650 in black plastic, which sits precisely on the diameter of the cell. Multiple pieces can be assembled in any shape of the battery assembly thanks to the snap system. Advantage: Can be conbined to any shape you need. High temperature...
Battery Type26650 CompanyOEM G. Weight0.002 kg
€040
In Stock
+ −
Battery Clip 9V - Plug 5.5/2.1 (Arduino Compatible)
29-00012828
This simple cable has so many uses! Plug the 9 volt battery clip onto a standard 9V battery and connect the other end to anything with a 5.5x2.1mm, center-positive barrel jack. Use this cable to battery-power any device that needs 9V and has an on-board barrel jack - it works great for...
Battery Type6F22 - 9V Type of connection cableDC 5.5/2.1mm Cable length0.10 m
€080
Out of Stock
Battery Holder 1x9V - Drawer
29-00012826
Battery Type6F22 - 9V Battery Slots1 CompanyOEM
€080
Out of Stock
Micro:maqueen - CR123A Battery Holder
25-00016921
This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to provide more than 8 hours continuous power for Maqueen.
Battery TypeCR123A Battery Slots1 CompanyDFRobot
€740
In Stock
+ −
Battery Holder 2×18650 with Plug 5.5×2.1
39-00011868
This case allows you to power your projects with a 7.2V battery supply.
Battery Type18650 Battery Slots2 CompanyOEM
€100
In Stock
+ −
Battery Holder 1xΑΑA - with Wires
05-00041004
Battery TypeAAA Battery Slots1 CompanyComf
€040
In Stock
+ −
Battery Holder 2xΑΑA - with Wires
05-00042199
The 2xAAA Battery Holder puts a nice finishing touch on your battery powered project.
Battery TypeAAA Battery Slots2 CompanyComf
€040
In Stock
+ −
Battery Holder 2xΑΑA with JST PH Connector
19-00010758
This 2xAAA battery holder puts a nice finishing touch on your battery-powered project. This holder features a sliding, removable cover as well as an ON/OFF switch that can be used to control power to your project. The JST PH connector is compatible with prototype boards like  BBC micro:bit .
Battery TypeAAA Battery Slots2 CompanyOEM
€090
In Stock
+ −
Battery Holder 3xΑΑA - with Wires
05-00043112
Battery TypeAAA Battery Slots3 CompanyComf
€060
In Stock
+ −
Battery Holder 4xΑΑA Cube - with Wires
05-00044399
Battery TypeAAA Battery Slots4 CompanyComf
€055
In Stock
+ −
Battery Holder 4xAΑΑ - with Wires
05-00044199
Battery TypeAAA Battery Slots4 CompanyComf
€090
In Stock
+ −
Battery Holder 4xΑΑA BH7-4002 Cube - with Wires
29-00012822
Battery TypeAAA Battery Slots4 CompanyOEM
€050
In Stock
+ −
Сategories
Product filters
Battery Type
    Show all (14)
Battery Slots
Manufacturer
    Show all (7)
Bestsellers