Αρχική Σελίδα/Ρομποτική/Επικοινωνία/RF & nRF/nRF24L01 2.4GHz Wireless Transceiver Module with Antenna

nRF24L01 2.4GHz Wireless Transceiver Module with Antenna

Κωδικός:

19-00019846

Part Number: NRF24L01

ΚατασκευαστήςOem Part NumberNRF24L01

Προπαραγγελία

Αναμένεται την Παρασκευή, 27 Δεκεμβρίου 2024

€6⁸⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€5.44

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

2.4G NRF24L01 Wireless Module With Antenna is the latest in RF modules. This module uses the 2.4GHz transceiver from Nordic Semiconductor, the NRF24L01. This transceiver IC operates in the 2.4GHz band and has many new features.

This board features a reverse polarized SMA connector for maximum RF range and there is PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.This module comes with the 2.4G antenna (2DB), with 250Kbps transmission rate on open air and it can reach the 800-1K meters communication distance.This wireless Transceiver module is an easy and suitable module if want to set up wireless communication system at a low cost.It can achieve a good balance between wireless transition performance and cost.

It can easily add MCU/ARM/PIC/AVR/STM32.This nRF24L01+ module is designed with the Power amplifier and SMA antenna. This allowed to use the wireless communication up to 1000 meters (No barrier). RF part, it has been done a lot of optimization matching debugging. The emission efficiency to achieve the highest harmonic minimum and make NRF24L01P + PA + LNA wireless module of RF interference to the external equipment reaches minimum, while not susceptible to interference from other devices. NRF24L01P + PA + LNA wireless module integration is extremely high, the size is 41mm x 15.5mm to make conveniently embedded.

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

1x 2.4GHz NRF24L01 Transreceiver module.
1x SMA Antenna.

Voltage: 3-3.6V
Max output power: +20 dBm
Working current in transmit mode: 115mA
Working current in receiver mode: 45mA
Current in mode: 4.2uA
Operating temperature: -20°C-70°C
Receiver sensitivity:
- -92dBm in 2Mbps mode
- -95dBm in 1Mbps mode
- -104dBm in 250kbps mode
PA growth: 20dB
LAN growth: 10dB
LAN noise figure: 2.6dB
Antenna growth: 2dBI
2M rate: 520m
It uses 2.4GHz global open ISM band, with license free.
Transmit power is greater than +20 dBm.
Support six-channel data reception.
2Mbit/s speed makes high quality VoIP possible
Multi frequency points: 125 frequency points meet the needs of multi-point communications and frequency hopping.
SPI interface facilitates the communication with MCU I/O port.
Facilitate the development for customers, without development RF part.
Software programming is fully compatible with NRF24L01 modules.
Dimensions: 48x15.5x14mm
Antenna length: 108mm

Pinout

This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!!
It can achieve a good balance between wireless transition performance and cost!

You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system!
What's more, this nRF24L01+ module is designed with Power amplifier and SMA antenna
This allowed you to use the wireless communication up to 1000 meters! (No barrier)