+302118004320
English (GB)
0Cart

Pimoroni Air Quality Sensor - SGP30

13-00012936
PIM480
CompanyPimoroni Part NumberPIM480
In Stock
Ships in 24 Hours
€2420
Pimoroni
+ −
Add to wish list
Ask a question
Gropbotronics Store Availability
Availability in Retail Store
Payments & Shipping

Measure indoor air quality—total volatile organic compounds (TVOC) and equivalent CO2 (eCO2)—with this digital sensor for Raspberry Pi and Arduino.

The SGP30 sensor measures two different types of gases: volatile organic compounds (like hydrocarbons) and equivalent carbon dioxide (H2 level is used as a proxy for this). The sensor does some nifty real-time baseline compensation to give you the most accurate readings, with just a 10-15% margin of error and minimal drift through time.

It's also compatible with our fancy Breakout Garden, where using breakouts is as easy just popping it into one of the six slots and starting to grow your project, create, and code.

We've designed this breakout board so that you can solder on the piece of right angle female header and pop it straight onto the bottom left 5 pins on your Raspberry Pi's GPIO header (pins 1, 3, 5, 7, 9).

THE PACKAGE INCLUDES

  • SGP30 breakout
  • 1x5 male header
  • 1x5 female right angle header

NOTES

  • Important! The sensor has a PTFE membrane over it (it looks like a slightly translucent white film). Do not peel it off! This is a gas-permeable membrane that is required for the sensor to function as intended.
  • When you first set the sensor running, it takes some time to warm up (up to a minute) before returning readings
  • Sensiron SGP30 TVOC and eCO2 sensor
  • TVOC sensing from 0-60,000 ppb (parts per billion)
  • CO2 sensing from 400 to 60,000 ppm (parts per million)
  • 1Hz sampling rate
  • I2C interface(address 0x58)
  • 3.3V or 5V compatible
  • Reverse polarity protection
  • Raspberry Pi-compatible pinout (pins 1, 3, 5, 7, 9)
  • Compatible with all models of Raspberry Pi, and Arduino
  • Dimensions: 19x19x3mm

Software:

  • We've put together a Python library that you can use to read data from your SGP30 breakout, and provided an example of how to use the library.
Warranty
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company
Pimoroni
Gross Weight
0.004kg
Sensor Type
  • Gas
Typical Input Voltage
  • 3.3VDC
  • 5VDC
Interface
  • Digital
Communication Protocol
  • I2C
Find similar
  • We suggest also