Στο πλαίσιο της κοινωνικής μας ευθύνης καλούμαστε να λάβουμε προληπτικά μέτρα για τον περιορισμό της διασποράς του ιού, προστατεύοντας παράλληλα την υγεία των εργαζομένων.
 
Προτιμάτε ηλεκτρονικές παραγγελίες και πληρώστε με online τρόπους πληρωμής (PayPal, Χρεωστικές/Πιστωτικές κάρτες και μεταφορές σε τραπεζικό λογαριασμό), αποφύγετε όσο είναι δυνατό την αντικαταβολή. Όλες οι ηλεκτρονικές παραγγελίες θα εκτελούνται κανονικά, ενδέχεται σε κάποιες περιπτώσεις να υπάρχει μικρή καθυστέρηση.
 
Οι ηλεκτρονικές παραγγελίες θα συνεχίζονται να αποστέλλονται κανονικά, 
για όλες τις παραγγελίες εντός Ελλάδας και έως 2kg, άνω των 40 €, δωρεάν μεταφορικά.
 
Τα προληπτικά μέτρα έχουν φέρει μεγάλη αύξηση των ηλεκτρονικών παραγγελιών με αποτέλεσμα να υπάρχουν καθυστερήσεις στις κούριερ από 4-15 ημέρες.
 
Από 18/3/2020 το φυσικό μας κατάστημα θα παραμείνει κλειστό βάση της νέας οδηγίας, επίσης κλειστή θα παραμείνει και η Reception στον Άγιο Δημητριο.
 
FREE SHIPPING for orders over 85.00

PrimaCreator MK8 Hardened Steel Nozzle 0.8mm

Τhe  premium nozzles  from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think.  To have a...
26-00022688
Gross Weight: 0kg
Company: PrimaCreator
Made in: EU
In Stock
Ships in 24 Hours
Low stock in store
14.95
Without VAT 12.06
+
WISHLIST COMPARE

DESCRIPTION

Τhe premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.

All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.

For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.

The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.

After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.

The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.

The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.

The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.

SPECIFICATIONS

Fits Printer:
  • CR-20 Pro
  • Ender-3
  • Ender-3 Pro
3D Printer Consumables:
Nozzle
Extruder Compatibility:
  • CR10 (MK8 Hotend)
  • MK8

Notes

  • Compatible with: Creality CR-10 series, MakerBot Replicator 2, CraftBot series
  • Marks/dots on Nozzle = Size
    • 0 = 0.20mm
    • 3 = 0.40mm
    • 4 = 0.60mm
    • 5 = 0.80mm

WE SUGGEST ALSO