Home/3D Printing/Filament/PLA/PrimaSelect PLA Glossy - 1.75mm - 750g spool - Chopstick Red

PrimaSelect PLA Glossy - 1.75mm - 750g spool - Chopstick Red

SKU:

26-00025578

Part Number: PS-PLAG-175-0750-CR

CompanyPrimacreator Part NumberPS-PLAG-175-0750-CR

Upon Order

Available in 10-30 days

€29⁹⁰ -50%

€14⁹⁵

Our quantity discounts:

Quantity

Price

€26.91

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

Description
Specifications

SELECT Glossy PLA is a new type of PLA that is much stronger than regular PLA and has a heat resistance up to 75°C. This means that you can use it for mechanical parts, as well as parts that you can use in (for example) a hot car during summer without the risk of the print going soft.

SELECT Glossy PLA is a unique filament due to it’s shiny surface. It will produce prints with an extremely shiny/metal finish that really stands out.

Due to the very low shrinkage SELECT Glossy PLA is very easy to use in all FDM/FFF printers, the risk of warping are very small. SELECT Glossy PLA is used the same way as regular PLA but with a slightly higher temperature range.

The print temperature should be between 210-230°C (typical is 220°C).
The filament should be used with a heated build plate for best results and depending on size of the print you, can use it with a range of 20-90°C (typical is 60°C)
Use normal print speed 40-60 mm/s.

NOTES

We recommend that you use PrimaFIX on you build surface for best adhesion and to avoid warping.
Our state of the art factory is equipped with the latest in laser measuring technology to ensure that you will receive a spool of filament with a very tight diameter and roundness tolerance.

Heated build platform required: Yes 20-90°C
Melting Temperature: 150-170°C

Spool Size: 200x55mm
Spool Hub Diameter: 53mm

Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a wide temperature range. Recommended temperature is 210° – 230°
Perfect diameter tolerance
SELECT is made to be one of the best on the filament market. With a diameter tolerance of +/-0.05 mm and continuous roundness.
Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.05 mm

Non-toxic and biodegradable
SELECT is made from 100% pure virgin PLA pellets. Thanks to the pure material SELECT meets the demand of a modern environmentally safe PLA and is REACH and RoHS compliant. There are no harmful additives in SELECT, so you don´t have to worry about any toxic fumes.
SELECT sticks on BuildTak, PEI or glass plate coated with adhesive spray or PrimaFIX.
SELECT comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.