FREE SHIPPING for orders over 85.00

Raspberry Pi Pico Basic Kit

Basic entry-level kit prepared for Pico Tested And Selected By Professional Engineer, With Rich Tutorials And Resources Fast Getting Started With...
Gross Weight: 0.4kg
Company: Waveshare
Part Number: Raspberry-Pi-Pico-Basic-K
Made in: China
Πληροφορίες: Το προϊόν είναι εξάρτημα και δεν αποτελεί έτοιμη συσκευή.
In Stock
Ships in 24 Hours
No stock in retail store
Without VAT 26.45


Basic entry-level kit prepared for Pico

Tested And Selected By Professional Engineer, With Rich Tutorials And Resources
Fast Getting Started With Raspberry Pi Pico And MicroPython Programming

Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing. Microcontrollers are a different type of device than Single Board Computers (like the Raspberry Pi 4 and previous generations of Pi), they don't run an operating system and they are typically programmed to do just one task - though that task can be pretty intricate and exciting! They're perfect for experimenting with hardware and using as the brains of custom devices, machines and inventions.

It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port.


Designed by Raspberry Pi, RP2040 features a dual-core Arm Cortex-M0+ processor with 264KB internal RAM and support for up to 16MB of off-chip Flash. A wide range of flexible I/O options includes I2C, SPI, and - uniquely - Programmable I/O (PIO). These support endless possible applications for this small and affordable package.


  1. Raspberry Pi Pico with pre-soldered header x1
  2. Breadboard x1
  3. 1*3PIN yellow pin header x1
  4. USB-A to micro-B cable x1
  5. PIR sensor x2
  6. Breadboard wires x1
  7. Single-joint potentiometer x1
  8. 8-Bit WS2812 RGB LED x1
  9. Round button x3
  10. Alarm x1
  11. 330R resistor x10
  12. 5mm LED x6
  13. LCD1602 RGB Module x1
  14. Jumper wire female-female 10PIN x1
  15. Jumper wire male-female 10PIN x1
  16. Plastic storage box x1

What's In The Kit 

  • Raspberry Pi Pico With Pre-Soldered Header

A Low-Cost, High-Performance Microcontroller Board With Flexible Digital Interfaces 

  • LCD1602 RGB Module
    LCD1602 RGB backlight character LCD, using I2C bus to display text or adjust RGB backlight
  • PIR motion sensor
    Pyroelectric IR sensor, outputs electric switch signal when IR array from human/animal body is detected
  • 8-Bit WS2812 RGB LED
    8x RGB LED, play around with cool light effects by programming
  • Alarm
    Quality active announciator, used for alarming or playing music
  • Single-joint potentiometer
    Adjustable potentiometer, 0~10K range, used for ADC test, volume/brightness adjustment, etc.
  • Round buttons
    Three colors, for button/switch detection
  • 5mm LED
    Three colors, for experiments like traffic light, PWM adjusted light, etc.
  • 330R resistors
    Providing current-limit protection when connected with LED in series
  • Breadboard and Jumper wires
    Quality 830 breadboard and sorts of wires, easy for connecting components
  • Plastic box
    Customized box for storing the modules and components


Breadboard Friendly :
Raspberry Compatible:
  • Pico


Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces, built on silicon designed at Raspberry Pi. Key features include:

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
  • 264kB of SRAM, and 2MB of on-board Flash memory
  • Castellated module allows soldering direct to carrier boards
  • USB 1.1 Host and Device support
  • Low-power sleep and dormant modes
  • Drag & drop programming using mass storage over USB
  • 26 multi-function GPIO pins
  • 2×SPI, 2×I2C, 2×UART, 3×12-bit ADC, 16×controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating point libraries on-chip
  • 8×Programmable IO (PIO) state machines for custom peripheral support
  • Form factor: 51x21mm