ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Silicone Heatbed 400x400mm - 220V 1000W Black

από OEM
This is 1000 Watt, 220V, 400x400mm silicone heater with integrated temperature feedback thermistor, for your 3D printer heated bed. This heater will...
14-00012890
Ογκομετρικό βάρος: 0.45kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: OEM
Χώρα Προέλευσης: Κίνα
Διαθέσιμο
Αποστολή σε 24 ώρες
Χωρίς απόθεμα στο φυσικό κατάστημα
Από 49.90
29.94
Χωρίς ΦΠΑ 24.15
Κέρδος: 19.96 (40%)
Σε Προσφορά
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 10+
Τιμή 39.92

ΠΕΡΙΓΡΑΦΗ

This is 1000 Watt, 220V, 400x400mm silicone heater with integrated temperature feedback thermistor, for your 3D printer heated bed. This heater will greatly reduce your waiting time for heated bed to heat up. 3M adhesive backing offers excellent and easy mounting. Use it with glass or aluminum print surface. Check out our store for complete heated bed solution, with 3 point adjustment, using this silicone heater.

ΣΗΜΕΙΩΣΕΙΣ

Use solid state relay (SSR) to control this heater via your 3d printer electronics. This solution will not put load associated with heated bed on your 3D printer power supply.

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
OEM
Μικτό Βάρος:
0.45kg
Χώρα Προέλευσης:
Κίνα

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Silicone Heater Technical Specs:
  • Voltage: 220V DC or AC
  • Power rating: 1000 Watt
  • Maximum working temperature: 160C( at room temperature)
  • Current: 4.5A
  • Resistance: 48.4
  • Mounting option: 3M sticky adhesive backing
  • Production tolerance: +/-10%
  • Thermistor type: NTC 3950, directly supported in Marlin firmware
  • Waterproof level: IP65
Integrated NTC 3950 100K Thermistor specs:
  • Use TEMP_SENSOR number 11 in Marlin firmware
  • High accuracy: 1%
  • Resistance value at 25°C=100K
Dimensions:
  • Size: 400x400 mm
  • Thickness: about 1.5mm-1.6mm
  • Wiring length: 1 meter or longer