>>> Θέσεις εργασίας <<<
Σημαντική ενημέρωση: Προτείνουμε αλλαγή κωδικού για την ασφάλειά σας (οι κωδικοί χρησιμοποιούν πολύ ασφαλή μέθοδο κρυπτογράφησης)
Στις 22/5 σημειώθηκε μη εξουσιοδοτημένη πρόσβαση στο κατάστημά μας. Μάθετε περισσότερα εδώ.
ΣΥΝΔΕΣΗ | ΕΓΓΡΑΦΗΜε την εγγραφή σου, έχεις επιπλέον δυνατότητες
3D ΕκτύπωσηPopularΜεγάλη ποικιλία σε τρισδιάστατους εκτυπωτές και νήματα!
3D ΕκτυπωτέςHot
Νήματα 3D
Ρητίνες 3D Εκτυπωτών
Ανταλλακτικά & Αναβάθμιση
Αξεσουάρ & Εργαλεία
3D Σαρωτές
Χαράκτες Λέιζερ
3D Στυλό
ΡομποτικήTOPΔημιουργία και καινοτομία με Arduino, micro:bit, Raspberry Pi...
Arduino
Raspberry Pi
micro:bit
Αισθητήρες
Breakout Boards
Αναπτυξιακά Εργαλεία
Επικοινωνία
STEM
Οθόνες
Wearables
ΗλεκτρονικάΗλεκτρονικά εξαρτήματα για να ολοκληρώσεις την κατασκευή σου.
Transistor-Mosfet-Triac
Ολοκληρωμένα ICs
Γέφυρες Ανόρθωσης
Buzzer - Speakers
Ασφάλειες
Πλακέτες Κατασκευών
Ρελέ
Αντιστάσεις
Optoelectronics
Δίοδοι
ΜηχανολογικάΜηχανολογικός εξοπλισμός, Κινητήρες, Βίδες και Τροχαλίες.
Κινητήρες
Γραμμική Κίνηση
Build Parts
Βίδες/Αποστάτες
Πνευματικά
Σύνδεσμοι Αξόνων
Τροχαλίες/Ιμάντες
Actobotics
Ρουλεμάν
Collars/Hubs
Hardware
Κουτιά Κατασκευών
Ψύξη / Ανεμιστηράκια
Τροφοδοτικά
Έτοιμα Καλώδια
Μπαταρίες
Καλώδια
Διακόπτες
Ακροδέκτες
Βύσματα
Βάσεις Ολοκληρωμένων
Εργαλεία
Εργαλεία Κόλλησης
Πολύμετρα
Εργαλεία Χειρός
Φορητές Συσκευές Μέτρησης
Ηλεκτρικά Εργαλεία
Εξοπλισμός Εργαστηρίου
Θερμοσυστελλόμενα
Χημικά
Οργάνωση / Αποθήκευση
Όργανα Μέτρησης Πάνελ
STEMEducation
Βαθμίδα
Πλατφόρμα
ανά Brand
ΚατασκευαστέςAll brandsΔιαθέτουμε υλικό από τους μεγαλύτερους οίκους. Δες τα όλα εδώ!
Προσφορές
Κατασκευαστές
Νέα προϊόντα
Είδη σε Προσφορά
+302118004320 Δε-Πα 9:00-17:00
Email [email protected]
Δωρεάν μεταφορικά για παραγγελίες άνω των 85€ για δέματα έως 2kg.
Σε παραγγελίες κάτω των 85€ τα μεταφορικά ξεκινούν από 2.70€.
BOXNOW από 1.50€ για παραλαβή απο θυρίδα.
Μεγάλη επιλογή σε τρόπους πληρωμής: Αντικαταβολή, Χρεωστική/Πιστωτική κάρτα, Iris, PayPal
Τρόποι πληρωμής | Τρόποι αποστολής
Teensy 4.0 is the latest Teensy, offering the fastest microcontroller and powerful peripherals in the Teensy 1.4 by 0.7 inch form factor. It features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. Teensy 4.0 is the same size and shape as Teensy 3.2, and retains compatibility with most of the pin functions on Teensy 3.2.
Teensy 4.0 can be programmed using the Arduino IDE with Teensyduino add-on.
Processor
Teensy 4.0 features an ARM Cortex-M7 processor at 600 MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today.
Benchmark results measured with CoreMark as an Arduino sketch. For an alterative to synthetic benchmarking, see this Digital Signature Speed Test.
Pinouts
Teensy 4.0 is the same size and shape as Teensy 3.2, and retains compatibility with most of the pin functions on Teensy 3.2.
Cortex-M7 Processor Details
ARM Cortex-M7 brings many powerful CPU features to a true real-time microcontroller platform.
Cortex-M7 is a dual-issue superscaler processor, meaning M7 can execute 2 instructions per clock cycle, at 600 MHz! Of course, executing 2 simultaneously depends upon the compiler ordering instructions and registers. Initial benchmarks have shown C++ code compiled by Arduino tends to achieve 2 instructions about 40% to 50% of the time while performing numerically intensive work using integers and pointers.
Cortex-M7 is the first ARM microcontroller to use branch prediction. On M4, loops and other code which much branch take 3 clock cycles. With M7, after a loop has executed a few times, the branch prediction removes that overhead, allowing the branch instruction to run in only a single clock cycle.
Tightly Coupled Memory is a special feature which allows Cortex-M7 fast single cycle access to memory using a pair of 64 bit wide buses. The ITCM bus provides a 64 bit path to fetch instructions. The DTCM bus is actually a pair of 32 bit paths, allowing M7 to perform up to 2 separate memory accesses in the same cycle. These extremely high speed buses are separate from M7's main AXI bus, which accesses other memory and peripherals. 512K of memory can be accessed as tightly coupled memory. Teensyduino automatically allocates your Arduino sketch code into ITCM and all non-malloc memory use to the fast DTCM, unless you add extra keywords to override the optimized default.
Memory not accessed on the tightly coupled buses is optimized for DMA access by peripherals. Because the bulk of M7's memory access is done on the 2 tightly coupled buses, powerful DMA-based peripherals have excellent access to the non-TCM memory for highly efficient I/O.
Teensy 4.0's Cortex-M7 processor includes a floating point unit (FPU) which supports both 64 bit "double" and 32 bit "float". With M4's FPU on Teensy 3.5 & 36, and also Atmel SAMD51 chips, only 32 bit float is hardware accelerated. Any use of double, double functions like log(), sin(), cos() means slow software implemented math. Teensy 4.0 executes all of these with FPU hardware.
Power Consumption & Management
When running at 600 MHz, Teensy 4.0 consumes approximately 100 mA current.
Teensy 4.0 provides support for dynamic clock scaling. Unlike traditional microcontrollers, where changing the clock speed causes wrong baud rates and other issues, Teensy 4.0 hardware and Teensyduino's software support for Arduino timing functions are designed to allow dynamically speed changes. Serial baud rates, audio streaming sample rates, and Arduino functions like delay() and millis(), and Teensyduino's extensions like IntervalTimer and elapsedMillis, continue to work properly while the CPU changes speed.
Teensy 4.0 also provides a power shut off feature. By connecting a pushbutton to the On/Off pin, the 3.3V power supply can be completely disabled by holding the button for 5 seconds, and turned back on by a brief button press. If a coin cell is connected to VBAT, Teensy 4.0's RTC also continues to keep track of date & time while the power is off.
Teensy 4.0 also can also be overclocked, well beyond 600 MHz!