Waveshare GGSM/GPRS/Bluetooth HAT - SIM800C

Κωδικός:

31-00016157

Part Number: SIM800C GSM/GPRS HAT

ΚατασκευαστήςWaveshare Part NumberSIM800C GSM/GPRS HAT

Διαθέσιμο

Αποστολή σε 24 ώρες

€29⁹⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€26.91

+ −

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

GSM/GPRS/Bluetooth HAT for Raspberry Pi, Based on SIM800C.

This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, and Bluetooth.

It allows your Pi to easily send messages, connect to wireless Internet, transfer data via Bluetooth, and so on.

General

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
Bluetooth 3.0, supports data transferring through Bluetooth
UART interface, for connecting host control boards like Arduino/STM32
Onboard voltage level translator, 3.3V by default, switch to 5V via jumper
2x LEDs for indicating the module working status
SIM card slot for 1.8V/3V SIM card
Baudrate auto detection (1200bps ~115200bps)
Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
Supports SIM application toolkit: GSM 11.14 Release 99
Comes with development resources and manual
- Examples for:
  - Raspberry Pi
  - Jetson Nano
  - Arduino
  - STM32

Misc

GSM/GPRS

Band
- GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz
- Quad-band auto search
- Compliant to GSM phase 2/2+
Emitting power
- Class 4 (2W @ GSM 850/EGSM 900 MHz)
- Class 1 (1W @ DCS 1800/PCS 1900 MHz)
GPRS connectivity
- GPRS multi-slot class 12 (default)
- GPRS multi-slot class 1~12 (configurable)
GPRS data feature
- Downlink speed: max 85.6kbps
- Uplink speed: max 85.6kbps
- Coding schemes: CS-1\CS-2\CS-3\CS-4
- Supports PAP (Password Authentication Protocol) for PPP connection
- Supports PBCCH
- Supports USSD
SMS
- Supports: MT/MO/CB/Text/PDU mode
- SMS storage: SIM card