Αρχική Σελίδα/Ρομποτική/Raspberry Pi/Raspberry Pi Πρόσθετα (HATs)/Waveshare NFC HAT for Raspberry Pi - PN532

Waveshare NFC HAT for Raspberry Pi - PN532

Κωδικός:

31-00016958

Part Number: WHS16958

ΚατασκευαστήςWaveshare Part NumberWHS16958

Διαθέσιμο

Αποστολή σε 24 ώρες

€22⁸⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€20.52

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

This is a Raspberry Pi NFC HAT based on PN532 operating in the 13.56MHz frequency range. It supports three communication interfaces: I2C, SPI, and UART.

NFC (Near Field Communication) is a wireless technology allows contactless point-to-point data communication between devices within a short distance of 10 cm. It is widely used in applications such as access control system, smart tickets, meal card, etc.

Based on the popular NFC controller PN532 with multi interface options, this HAT will easily enable NFC function for your Raspberry Pi.

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

PN532 NFC HAT x1
MIFARE Classic 1K Card x1

ΣΗΜΕΙΩΣΕΙΣ

Raspberry Pi is NOT included.

PN532 NFC HAT on board resource

Raspberry Pi GPIO connector: for connecting with Raspberry Pi
PN532 control pins: for connecting with other host boards like STM32
NFC induction coil
PN532 chip: NFC controller
Power indicator
DIP switches: for configuring the connection between PN532 and Raspberry Pi (only one of the I2C/SPI/UART can be connected at the same time)
Mode selection:
- I0-L, I1-L: enable UART
- I0-H, I1-L: enable I2C
- I0-L, I1-H: enable SPI
INT0 jumper: response signal, connects to Raspberry Pi D16
RSTPDN jumper: reset signal, connects to Raspberry Pi D20

NFC controller: PN532
Operating voltage: 3.3V/5V
Operating frequency: 13.56MHz
Communication interfaces: I2C, SPI, UART (default)
Default baudrate: 115200 bps

Operating modes:
- reader/writing mode supporting ISO/IEC 14443A / MIFARE scheme
- reader/writing mode supporting FeliCa scheme
- reader/writing mode supporting ISO/IEC 14443B scheme
- card operation mode supporting ISO 14443A / MIFARE scheme
- card operation mode supporting FeliCa scheme
- ISO/IEC18092, ECM340 point-to-point

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Onboard PN532 chip, supports various NFC/RFID cards like MIFARE/NTAG2xx, etc.
Three interface options: I2C, SPI, and UART, configured via jumpers and switches
Breakout control pins, for easily connecting with host boards like STM32/Arduino
Comes with development resources and manual (examples for Raspberry Python/C, STM32, Arduino)

Applications:
- Contactless payment system
- Bluetooth and WiFi devices chaining
- Social sharing function like sharing contacts, photos, and videos
- Smart phone NFC app