Waveshare Power over Ethernet HAT

31-00018014
PoE HAT (B)
ΚατασκευαστήςWaveshare Part NumberPoE HAT (B)
Κατόπιν παραγγελίας
Διαθέσιμο σε 45-60 ημέρες
2480
Ποσοτικές εκπτώσεις:
Ποσότητα
10+
Τιμή
22.32
Gropbotronics Store Availability
Διαθεσιμότητα Καταστημάτων
Πληρωμή & Μεταφορικά

Power Over Ethernet HAT (Type B) For Raspberry Pi 3B+/4B, 802.3af Power-Sourcing Equipment Required

POE HAT FOR RASPBERRY PI

Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant

OLED for real-time monitoring temperature, IP, and fan status

The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B. By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.

Features At A Glance

  • Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B
  • PoE (Power Over Ethernet) capability,802.3af-compliant
  • Fully isolated switched-mode power supply (SMPS)
  • 0.91" OLED, for monitoring processor temperature, IP address, and fan status in real-time
  • Onboard cooling fan, allows auto running on powerup OR programmable control, configured by switch
  • Integrates PCF8574 IO expander for I2C bus, providing pin P0 for directly fan control, and more spare IO pins

For Use With Raspberry Pi 3B+/4B

Standard Raspberry Pi 40PIN GPIO Stackable Header, Allows Connecting Other HATs

Power Over Ethernet

Providing Both Network Connection And Power Supply For Your Raspberry Pi In One Cable

* proper 802.3af-compliant power sourcing equipment is required

 

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

  1. PoE HAT (B) x1
  2. Standoffs pack x1
12

0.91" OLED Display

28×32 Pixels, I2C-Bus Controlled Monitoring Processor Temperature, IP Address, Fan Status In Real-Time

Cooling Fan

Allows Auto Running On Powerup OR Programmable Control, Configured By Switch

Automatically Turn On/Off Depending On The Raspberry Pi Processor Temperature

Onboard PCF8574 Chip

PCF8574 IO Expander For I2C Bus, Providing 8 IO Pins, Of Which P0 For Fan Control

And Extra Spare Pins On Solder Pads (P1-P7, INT)

Pinout Definition

ΣΗΜΕΙΩΣΕΙΣ

  • Any Backward-Compatible Future Versions Will Be Supported As Well
  • POE:
    • Power Inpun: 37V ~ 57V DC in
    • Power Output: 5V 2.5A DC out
  • Network Standard: 802.3af PoE
  • OLED:
    • Size: 0.91"
    • Pixels: 128x32
    • Driver: SSD1306
    • Display Color: White
  • Dimensions: 56.5x65mm

Κατασκευαστής
Waveshare
Part Number
PoE HAT (B)
Εγγύηση
12 Μήνες Εγγύηση Κατασκευαστή
Καθ. Βάρος
0.076kg
Συμβατότητα
  • Raspberry Pi 4
Τύπος HAT
  • Power Supply
Βρες Παρόμοια
  • Προτείνουμε επίσης