Αρχική Σελίδα/Ρομποτική/Αναπτυξιακά Εργαλεία/RP2040 & RP2350/Waveshare RP2040 IPS LCD – 1.28" Round

Waveshare RP2040 IPS LCD – 1.28" Round, Οθόνη Aφής: Without, Επιλογές Θήκης: With case

Waveshare RP2040 IPS LCD – 1.28" Round, Οθόνη Aφής: Without, Επιλογές Θήκης: With case, 2 image

Waveshare RP2040 IPS LCD – 1.28" Round, Οθόνη Aφής: Without, Επιλογές Θήκης: With case, 3 image

Waveshare RP2040 IPS LCD – 1.28" Round, Οθόνη Aφής: Without, Επιλογές Θήκης: With case, 4 image

Waveshare RP2040 IPS LCD – 1.28" Round

Κωδικός:

31-00026369

Part Number: RP2040-LCD-1.28-B

Οθόνη Aφής:

Without Capacitive

Επιλογές Θήκης:

Without case With case

ΚατασκευαστήςWaveshare Part NumberRP2040-LCD-1.28-B

Κατόπιν παραγγελίας

Διαθέσιμο σε 45-60 ημέρες

€27⁸⁰

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Προβολη ολων των παραλλαγών ως λίστα

Column filling

Ταξινόμηση Τιμή	Ταξινόμηση Διαθεσιμότητα	Ταξινόμηση Κωδικός	Ταξινόμηση Οθόνη Aφής	Ταξινόμηση Επιλογές Θήκης
€19⁹⁰	Διαθέσιμο + − ΑΓΟΡΑ	31-00022668	Οθόνη Aφής: Without	Επιλογές Θήκης: Without case
€27⁸⁰	Διαθέσιμο + − ΑΓΟΡΑ	31-00026369	Οθόνη Aφής: Without	Επιλογές Θήκης: With case
€28⁶⁰	Διαθέσιμο + − ΑΓΟΡΑ	31-00024580	Οθόνη Aφής: Capacitive	Επιλογές Θήκης: Without case
€34⁹⁰	Διαθέσιμο + − ΑΓΟΡΑ	31-00026371	Οθόνη Aφής: Capacitive	Επιλογές Θήκης: With case

Περιγραφή
Χαρακτηριστικά
Βίντεο

This is a low-cost, high-performance MCU board designed by Waveshare. Despite its compact size, it features a 1.28-inch round LCD display, Li-ion battery charging manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and more. With access to all GPIO and debug pins, it enables quick development and easy integration into your products.

Key features

RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133MHz
264KB of SRAM, and 2MB of on-board Flash memory
Type-C connector, keeps it up to date, easier to use
Onboard 1.28inch 240×240 pixels 65K colorful IPS LCD display for clear color pictures
Lithium battery recharge/discharge header, suitable for mobile devices
Adopts CNC metal case with Acrylic dull-polish bottom plate
All GPIO pins are adapted through 1.27 pitch female headers (There are 30 pins in total, but some pins have been connected to the internal circuit, please refer to the wiki for details when multiplexing)
USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
2×SPI, 2×I2C, 2×UART, 4×12-bit ADC, 16× controllable PWM channels
Accurate clock and timer on-chip
Temperature sensor
Accelerated floating-point libraries on-chip
8× Programmable I/O (PIO) state machines for custom peripheral support

Available options

Board without case
Board with CNC metal case

Display technical data

Control chip	GC9A01A
Resolution	240×240
Communication interface	SPI
Display size	Φ32.4 mm
Display panel	IPS
Pixel size	0.135×0.135 mm

Hardware layout

USB Type-C connector
USB 1.1 with device and host support
ETA6096
high efficiency Lithium battery recharge manager
Battery Header
MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
QMI8658
IMU, includes a 3-axis gyroscope and a 3-axis accelerometer
1.27mm pitch headers
Adapting all GPIO and Debug pins
W25Q16JVUXIQ
2MB NOR-Flash
RP2040
Dual-core processor, up to 133MHz operating frequency
RESET Button
BOOT Button
press it when resetting to enter download mode