+302118004320
Greek (GR)
0Στο Καλαθι

Waveshare RS232 HAT - 2-Channel Isolated

31-00017498
2-CH RS232 HAT
ΚατασκευαστήςWAVESHARE Part Number2-CH RS232 HAT
Διαθέσιμο
Αποστολή σε 24 ώρες
€1990
WAVESHARE
Ποσοτικές εκπτώσεις:
Ποσότητα
10+
Τιμή
€18.91
+ −
Αγαπημένα
Κάνε μια ερώτηση
Gropbotronics Store Availability
Διαθεσιμότητα Καταστημάτων
Πληρωμή & Μεταφορικά

2-Channel Isolated RS232 Expansion HAT for Raspberry Pi, SC16IS752+SP3232 Solution, with Multi Onboard Protection Circuits

This is a 2-channel isolated RS232 expansion HAT designed for Raspberry Pi, adopts the SC16IS752+SP3232 solution, with embedded protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc.

It is easy to control the 2-channel RS232 via SPI interface. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for fields like industrial automation.

 

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

  1. 2-CH RS232 HAT x1
  2. 2x20PIN female pinheader x1
  3. RPi screws pack (2pcs) x1

2-CH RS232 HAT on board resource

  1. SC16IS752 UART expansion chip
  2. SP3232 RS232 transceiver
  3. ADUM1412 digital isolator
  4. B0505LS power supply isolation module
  5. RT9193-33 power chip
  6. Raspberry Pi GPIO connector: for connecting Raspberry Pi
  7. MCU control header: for connecting host control boards like Arduino
  8. RS232 connector: 2 channels RS232 interface (RS232 9PIN male)
  9. Transient suppress diode array
  10. ESD protection two-way diode
  11. Serial port status indicator
    RXD1/TXD1: channel 1 transceiving indicator
    RXD2/TXD2: channel 2 transceiving indicator
  12. Power indicator
  13. Interrupt pin switch
    The interrupt pin IRQ is connected to P5 (BCM P24) by default
    Changeable via 0R resistor

 

ΣΗΜΕΙΩΣΕΙΣ

  • The Raspberry Pi and serial cables are NOT included.
  • This HAT doesn't come with any serial cable, you may also want to pick up the following cables for easy use:
    • Serial Cable Dual Female Crossover: for connecting RS232 devices with male connector, OR for self transceiving test of the HAT's 2 channels RS232
    • Serial Cable Male to Female Straight Through: for connecting RS232 devices with female connector
  • UART expansion chip: SC16IS752
  • RS232 transceiver: SP3232
  • Communication interface: SPI
  • Data rate: 300 ~ 921600 bps
  • Operating voltage: 3.3V / 5V
  • Dimensions: 65x56.5mm
  • Mounting hole size: 3.0mm

Pinouts

PIN RASPBERRY PI (BCM) DESCRIPTION
VCC 5V 3.3V/5V power supply
GND GND Ground
SCK P21 (SPI1 SCLK) SPI clock input
MOSI P20 (SPI1 MOSI) SPI data input
MISO P19 (SPI1 MISO) SPI data output
CS P18 (SPI1 CS) SPI chip select
IRQ P24 Interrupt output
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • Adopts SC16IS752+SP3232 dual chip combination, converts SPI to RS232, data rate up to 921600bps
  • Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic
  • Onboard LEDs for indicating the power and transceiver status
  • Breakout SPI control pins, for connecting with host control boards like Arduino
  • Comes with development resources and manual (examples in C and Python)
Κατασκευαστής
WAVESHARE
Μικτό Βάρος
0.04kg
Τύπος HAT
  • RS232/RS485
Βρες Παρόμοια