Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn't know how? Well, here's how: The 24V solenoid controlled fluid valve. Simply connect a fluid source to the 1/2" threaded inlet and it will interrupt the flow until 24V is applied to the fast-on connectors on the solenoid.
- Inlet valve (Working water pressure: 0.02~0.8MPa)
- Drain valve (Working water pressure: 0~0.02MPa)
- Angle of installation: Parallel (180 degrees)
- Connector: G1 / 2 20mm
- Rated working voltage: DC 24V
- Power: 5W
- Rated working current: 0.22A
- DC esistance(20°C): 27.7 +/- 0.6ohms
- Valve mouth diameter: 1.4cm
- External diameter: 2cm
- Length: 2.5cm
- Water temperature: 0-60°C
- Dimensions: 71x34x57mm
- Weight: 115g