Home/3D Printing/Filament/PET (PETG,PETT)/3D Printer Filament Devil - PETG 1.75mm Dark Grey 1kg

3D Printer Filament Devil - PETG 1.75mm Dark Grey 1kg

SKU:

36-00017581

Part Number: DEV-PETG-1.75-DGY

Color:

Dark Grey

CompanyDEVIL DESIGN Part NumberDEV-PETG-1.75-DGY

In Stock

Ships in 24 Hours

€22⁰⁰

Our quantity discounts:

Quantity

10+

Price

€19.80

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

View all variations as list

Column filling

Sort by Price	Sort by Availability	Sort by SKU	Sort by Color
€22⁰⁰	In Stock + − ΑΓΟΡΑ	36-00017203	Color: Black
€22⁰⁰	In Stock + − ΑΓΟΡΑ	36-00017210	Color: Grey
€22⁰⁰	In Stock + − ΑΓΟΡΑ	36-00017215	Color: Transparent / Clear
€22⁰⁰	In Stock + − ΑΓΟΡΑ	36-00017216	Color: White
€22⁰⁰	In Stock + − ΑΓΟΡΑ	36-00017581	Color: Dark Grey

Description
Specifications

The PETG filament 1.75mm, also known as PET or PET-G is a material 3D printers, and its main feature is that it is very hard and has an extremely high resistance, therefore the printed pieces with this material are very powerful.

Another very important feature is that its shrinkage is very low, which is an ideal material when you have to print large flat pieces.

PETG is a modified polyester (polyethylene terephthalate), widely used in the industry (most soda bottles are made of this material or derivatives thereof), so it is a material that does not degrade the water. Therefore the industrial use, the PETG is one of more recyclable plastics used.

PETG offers a good alternative to the PLA and ABS, as it offers a higher mechanical strength than these, less shrinkage when printing the piece bends before breaking does not release odors or gases and has an excellent smooth finish.

The only drawback, due to its high resistance, is that it is necessary to melt a temperature above the PLA, but similar to the ABS. The working temperature in the Hotend is 240-260 degrees and the bed temperature about 70 degrees.

The PETG filament does not absorb moisture, so once open PETG materials does not degrade over time and do not need to save it with desiccants.

It is a relatively translucent compared to other materials 3D printer (including the color gamut) material.

Recommendations:

Hotend temperature: 220 ° C -250°C
Bed temperature (Heating bed): 70°C
It is advisable to use the “useful” filament cleaning sponge.

NOTES

It is recommended spraying with lacquer the glass base, since due to its mechanical properties, can “paste” strongly to the glass if you do not use lacquer 3D printer, being sometimes very difficult to disengage without using lacquer.
We recommend to set hotend temperature between 220-250°C and bed to 60-70°C.

Material: PET-G (PET).
Diameter: 1.75mm ± 0.05mm.
Brand: Devil Design.
Weight: 1kg net.
Roll diameter: 200mm.
Coil width: 90 mm approx.
Hole diameter: 50mm.