Home/Robotics/Arduino/Arduino Official Boards/Arduino Micro

Arduino Micro

SKU:

02-00010329

Part Number: A000093

Header:

With Header Without Header

CompanyArduino Part NumberA000093

In Stock

Ships in 24 Hours

€24⁰⁰

Our quantity discounts:

Quantity

10+

Price

€21.60

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

View all variations as list

Column filling

Sort by Price	Sort by Availability	Sort by SKU	Sort by Header
€24⁰⁰	In Stock + − ΑΓΟΡΑ	02-00010329	Header: Without Header
€26⁸⁰	In Stock + − ΑΓΟΡΑ	02-00010320	Header: With Header

Description
Specifications

The Arduino Micro is a microcontroller board based on the ATmega32u4, developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.

The Micro is similar to the Arduino Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page.

The Micro can be powered via the micro USB connection or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from a DC power supply or battery. Leads from a battery or DC power supply can be connected to the Gnd and Vin pins. The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may become unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.

The ATmega32U4 has 32 KB (with 4 KB used for the bootloader). It also has 2.5 KB of SRAM and 1 KB of EEPROM (which can be read and written with the EEPROM library).

NOTES

This is the original board Arduino Micro.
Only the Micro board is included in the package, you can find a microUSB cable in our catalog and everything else you need for your project. This version of the Arduino Micro (A000053) comes with pre soldered pins, if you want to solder your own pins you can see the A000093 version.

Controller architecture: AVR
Dimensions: 48 x 18mm
Weight: 13g