ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Breadboard Power Supply Module - 3.3V/5V

από OEM

Αυτό το module τροφοδοσίας breadboard κάνει την τροφοδοσία του πρωτοτύπου σας πολύ εύκολη. Με μια τυπική υποδοχή 2.1mm barrel jack μπορείτε να την τροφοδοτήσετε με μια μπαταρία 9v χρησιμοποιώντας έναν συνδετήρα snap-on. Με έναν βολικό διακόπτη ON / OFF με ενδεικτική λυχνία LED δεν χρειάζεται να συνεχίζετε να συνδέετε και να αποσυνδέετε την πηγή τροφοδοσίας σας. Η πλακέτα έχει μια ομάδα αρσενικών pin 2x4 με 2 σύνολα για 3.3v και GND και 2 σύνολα για 5v και GND. Μία από τις αγαπημένες μας δυνατότητες είναι η θύρα USB για να συνδέσετε τις πλακέτες ανάπτυξης με τροφοδοσία USB, όπως το Arduino.

19-00012993
Ογκομετρικό βάρος: 0kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: OEM
Χώρα Προέλευσης: Κίνα
Διαθέσιμο
Αποστολή σε 24 ώρες
Διαθέσιμο στο φυσικό κατάστημα
1.80
Χωρίς ΦΠΑ 1.45
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 10+ 100+
Τιμή 1.44 1.26

ΠΕΡΙΓΡΑΦΗ

This solderless breadboard Power Supply Module makes powering your prototype a snap. With a standard 2.1mm barrel jack you can power it with a 9v battery using a snap-on connector or a wall-wart. With a convenient ON/OFF button switch with indicator LED you don’t have to keep plugging in and unplugging your power source.

The rails are powered separately so you can have one side as 3.3v and the other as 5v. There is also an off position for the jumper to break the circuit and not power the rail at all.

The board has a 2 x 4 group of male headers with 2 sets for 3.3v to GND and 2 sets for 5v to GND. One of our favorite features is the USB-A port to plug in your USB powered dev boards like an Arduino.

This gives the added benefit of tying the breadboard ground to the dev boards ground as well. There is a nice feature set in this little board and it’s a real time saver.

 

ΣΗΜΕΙΩΣΕΙΣ

  • This item only a Power Supply Module, Breadboard is not included.

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
OEM
Μικτό Βάρος:
0.001kg
Χώρα Προέλευσης:
Κίνα
Breadboard Friendly
:
Ναι

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Apply to MB102 breadboard
  • Input voltage:
    • 6.5-12 V (DC)
    • USB power supply
  • Output voltage: 3.3V/5V can switch over
  • Maximum output current: <700 ma
  • Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V
  • On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
  • Size: 53x32x25mm
  • Weight: 12g