FREE SHIPPING for orders over 85.00

Desoldering Iron Sucker 40W - CX-1109

by OEM
A electric dual-use suction tin sucker has a beautiful appearance, easy to suck tin. It can be used to take the components off the circuit board while not...
39-00032869
Gross Weight: 0.5kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: OEM
Made in: China
In Stock
Ships in 24 Hours
Low stock in store
8.20
Without VAT 6.61
+
Our quantity discounts:
Quantity 10+
Price 6.56
WISHLIST COMPARE

DESCRIPTION

A electric dual-use suction tin sucker has a beautiful appearance, easy to suck tin. It can be used to take the components off the circuit board while not damaging the components and circuit boards. It is specially used for the replacement of integrated circuits and multi-foot switch.

The suction tin sucker can be used as a general electric iron. It is an essential tool for the defense, scientific research, communication, aerospace, computer, radio, television, electronic professional maintenance personnel and the majority of radio enthusiasts.

Instructions

  1. It uses 220V 50Hz power supply with 30W power
  2. Turn on the power, preheating for 3-5 minutes
  3. Push down the piston handle, point the tin suction nozzle at the soldering part; after tin has melted, press the control button, the solder is sucked into the cylinder
  4. Tin suction device is equipped with two different diameter suction nozzles, depending on the thickness of the component lead
  5. When welding, the same operation as the soldering iron
  6. When disassembling the cylinder, press down the top of the cylinder according to the direction of the arrow, pull the cylinder and the handle apart at the same time, and the cylinder can be separated out; when disassembling the suction nozzle, spin it counterclockwise and remove it

 

SPECIFICATIONS

Type of Tool:
  • Desolder Sucker
Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
OEM
Gross Weight:
0.5kg
Made in:
China
Equipment type :
  • Desoldering Station

EXTRA SPECS

  • Power: 40W
  • Tip temperature: 400°C
  • Warm-up time: 5 - 10min
  • Tip diameter: 3mm
  • Weight: 0.23kg