eSUN eABS+HS 1.75mm 1kg – Black

16-00017593
eABS+HS-P175B1
ΚατασκευαστήςeSUN Part NumbereABS+HS-P175B1
Διαθέσιμο
Αποστολή σε 24 ώρες
1990
Gropbotronics Store Availability
Διαθεσιμότητα Καταστημάτων
Πληρωμή & Μεταφορικά

eABS+HS is a modified version of ABS material. Compared to conventional ABS, it exhibits lower shrinkage and superior interlayer adhesion, reducing the likelihood of warping and cracking during printing. It contains low VOC (Volatile Organic Compounds) components, resulting in a reduced odor during the printing process, making it more comfortable and stress-free. This material is optimized for high-speed printing, maintaining its performance even at higher speeds, providing an excellent printing experience. Additionally, it can be acetone polished to eliminate layer lines and further enhance the print quality.

Features

Heat resistance Low odor Low shrinkage rate Strong performance and toughness

High speed printing Acetone polishing is available Excellent printability

Notes

  1. ABS+ has a large shrink rate, so you should pay attention to heat preservation when printing. It is recommended to print on a closed chamber printer for better results.
  2. When cooling ABS+ it is recommended to turn on the fan to improve the printing effect or reduce the drape angle structure in the model. Also, try to reduce the print speed.

Files

Κατασκευαστής
eSUN
Μικτό Βάρος
1.4kg
Απόχρωση
 Μαύρο
Διάμετρος νήματος
1.75 mm
Θερμοκρασία Εκτύπωσης
230-270 °C
Ρολό
  • 1 kg
Βρες Παρόμοια
  • Προτείνουμε επίσης