Αρχική Σελίδα/3D Εκτύπωση/Νήματα 3D Εκτυπωτών/FLEX (TPU,TPC,TPE)/eSUN eLastic(TPE-83A) 1.75mm 1kg – Natural

eSUN eLastic(TPE-83A) 1.75mm 1kg – Natural

Κωδικός:

16-00017590

Part Number: eLastic-P175N1

Απόχρωση:

Φυσικό

ΚατασκευαστήςeSUN Part NumbereLastic-P175N1

Διαθέσιμο

Αποστολή σε 24 ώρες

€39⁹⁰

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Προβολη ολων των παραλλαγών ως λίστα

Column filling

Ταξινόμηση Τιμή	Ταξινόμηση Διαθεσιμότητα	Ταξινόμηση Κωδικός	Ταξινόμηση Απόχρωση
€39⁹⁰	Διαθέσιμο + − ΑΓΟΡΑ	16-00017591	Απόχρωση: Μαύρο
€39⁹⁰	Διαθέσιμο + − ΑΓΟΡΑ	16-00017590	Απόχρωση: Φυσικό

Περιγραφή
Χαρακτηριστικά

The eLastic TPE-83A filament from eSUN is perfect for applications such as functional models with flexibility and elasticity. The printed objects have a unique, soft feel with low surface friction and a matte look. Due to the mechanical properties of the material, the products are extremely impact-resistant and robust. Compared to other eSUN flexible series the printed models are softer than TPU-95A and eFlex, with delicate and soft hand feeling.

Filament Properties Table

Density(g/cm3)	1.14
Tensile Strength (MPa)	32
Elongation at Break (%)	420
Durability	9/10
Printability	6/10
Recommended printing parameters
Extruder Temperature (℃)	220 – 250℃
Recommended temperature	240℃
Bed temperature (℃)	45 – 60°C
Fan Speed	100%
Printing Speed	20 – 50mm/s
Heated Bed	Optional
Recommended Build Surfaces	Masking paper, PVP solid glue, PEI
Print recommendations	Drying at 55℃/>4h, short-range extruder, slow printing

Notes

it is recommended to dry the filament (55℃/> 4h) before printing to achieve the best printing effect, and it would be better to use together with a drybox when printing.
use a short-range double-wheel deceleration extruder designed for flexibility. eLastic materials cannot be printed by a remote extruder
After long print runs, impurities may form in the nozzle, so it is recommended to use it with a cleaning filament. If necessary, please replace the nozzle and throat with new ones.