eSUN PLA Chameleon 1.75mm 1kg - Polaris

16-00017840
ePLA-Chameleon-P175PO1
Polaris
ΚατασκευαστήςeSUN Part NumberePLA-Chameleon-P175PO1
Διαθέσιμο
Αποστολή σε 24 ώρες
2480
Gropbotronics Store Availability
Διαθεσιμότητα Καταστημάτων
Πληρωμή & Μεταφορικά

eSUN PLA Chameleon is a color-changing filament that responds to light and angles, creating a dynamic and colorful visual effect. The combination of light and shadow on your printed models can produce unpredictable, chameleon-like effects, enhancing the vibrancy of solid-colored filaments.

Features
  • Easy to peel off & easy to print: Support structures printed with eSUN Chameleon PLA are easier to remove compared to other filaments. This filament is based on PLA and has been improved for easy printing, offering a high success rate and making it user-friendly, even for beginners.
  • Stable dimensional tolerance: With minimal tolerance and low warping, eSUN PLA Chameleon ensures consistent feeding and stable prints. It provides excellent layer bonding, reduces stringing, prevents bubbles, and is easy to handle, resulting in a smooth and precise surface finish.
  • Clog-free, bubble-free & less tangle: eSUN PLA Chameleon is carefully wound using full mechanical winding and strict manual inspection to prevent tangling and avoid filament breakage. It melts well, feeds smoothly, and consistently, without clogging the nozzle or extruder. The filament is free from overlaps, tangling, and cracking.
  • Environmentally friendly packaging & cardboard reel: eSUN filament comes in a sealed vacuum bag with a desiccant to keep your 3D printer filaments in optimal storage conditions, free from dust or dirt before the packaging is opened.



Technical data
Filament properties
Density (g/cm3)1.24
Melt flow index (g/10min)4.5 (250°C/2.16kg)
Tensile strength (MPa) (Z)26.1
Elongation at break (%) (Z)3.9
Flexural strength (MPa) (XY)115.6
Flexural modulus (MPa) (XY)3303.2
IZOD impact strength (kJ/m2) (XY)3
Heat distortion temperature (°C, 0.45MPa)52
Recommended printing parameters
Extruder temperature (°C)200-240
Bed temperature (°C)45-60
Fan speed (%)100
Printing speed (mm/s)40-70



Κατασκευαστής
eSUN
Part Number
ePLA-Chameleon-P175PO1
Καθ. Βάρος
1kg
Απόχρωση
 Polaris
Διάμετρος νήματος
1.75 mm
Θερμοκρασία Εκτύπωσης
200-240 °C
Ρολό
  • 1 kg
Βρες Παρόμοια
  • Προτείνουμε επίσης