Σημαντική ενημέρωση: Προτείνουμε αλλαγή κωδικού για την ασφάλειά σας (οι κωδικοί χρησιμοποιούν πολύ ασφαλή μέθοδο κρυπτογράφησης)

Στις 22/5 σημειώθηκε μη εξουσιοδοτημένη πρόσβαση στο κατάστημά μας. Μάθετε περισσότερα εδώ.

Home/3D Printing/Spare Parts & Upgrades/Components/Filament Detection Module - Black 1.75mm

Filament Detection Module - Black 1.75mm

SKU:

14-00012887

CompanyOEM

In Stock

Ships in 24 Hours

€4⁸⁰

Our quantity discounts:

Quantity

10+

Price

€3.84

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

Description
Specifications

Newly designed smart module for detecting the status of the use of filament. To check the filament is whether run out or not, it automatically stops the 3D Printer when the filament runs out, so you will have a chance to supplement the filament which makes sure you won't print a incomplete printing. Built-in wearable copper in the feed inlet and outlet to extend the life span.

Filament Size: 1.75mm
Mounting Hole Size: 3.5mm
Mounting Hole Distance: 20mm
Cable Length: 1m

Used with Lerdge board:

When there is filament in, the green light in the module keeps lighting. And when the filament is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the filament can continue to print.
Wiring: Connect the module to the M-sensor port on the motherboard.

Used with other motherboards:

The filament detection module uses the level transition detection method. When with filament in, the detection level signal should be low, and when no filament, the filament port level signal goes high. When the system detects a determined transition from low to high level, it will regard it as the filament exhausted, then the board executes the pause command operation, and after the replacement of the filament, it will continue to print.