ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Gravity IO Expansion Shield for Arduino V7.1

από DFROBOT

Το IO Expansion Shield DFRobot εισήγαγε στην αγορά τον περίφημο χρωματικό κώδικα για είσοδο και έξοδο αισθητήρων και ενεργοποιητών. Η μορφή 3 pin για Σήμα, Τάση και Γείωση είναι εξαιρετικά χρήσιμη, ειδικά αν χρησιμοποιείται συνολικά με την ολοένα και μεγαλύτερη γκάμα μονάδων, αισθητήρων και συσκευών που ταιριάζουν.

25-00016113
Ογκομετρικό βάρος: 0.03kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: DFROBOT
Part Number: DFR0265
Χώρα Προέλευσης: Κίνα
Διαθέσιμο
Αποστολή σε 24 ώρες
Χωρίς απόθεμα στο φυσικό κατάστημα
11.20
Χωρίς ΦΠΑ 9.03
+

ΠΕΡΙΓΡΑΦΗ

IO Expansion shield is one of the market favourites. Fast robotics prototyping made affordable and simple thanks to this design. Soldering and wiring often become a problem when a bridged connection happens and components break. Increasing time and cost for projects. Often, without this solution and a soldering station, wire cripping tools or soldering station, robot prototyping or electronics DIY becomes a very long term project.

The DFRobot Expansion shield introduced to the market the famous color code for sensors and actuators' input and output. The 3 pin format for Signal, Voltage, and Ground is extremely useful, especially if used altogether with our increasingly large range of modules, sensors, and devices that just fit.

Alternatively, the board includes power input for salvaged power supplies or laboratory power supplies. Very common Xbee socket for multipurpose wireless connectivity such as RF, wireless, Bluetooth.

The new version includes a voltage hardware setting through a jumper to allow compatibility with a bigger range of components at 3.3v like Raspberry pi, Due, and others.

It also includes a Servo external power, with a protective diode. This way you can enable a large range of servos from your Arduino.

The latest version features a convenient switch that lets you program your ATmega328 boards like UNO, while you have another Serial device connected like an Xbee. Switch it, program it, and get it back up and running with another switch. You don't need to disassemble your hardware or wiring.

A LED on top board and a reset button is in order to make it just a natural extension to Arduino boards. The LED is connected to pin 13.

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Τυπος Shield:
  • Proto
  • Wireless
Κατασκευαστής
:
DFROBOT
Part Number:
DFR0265
Μικτό Βάρος:
0.033kg
Χώρα Προέλευσης:
Κίνα

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Input Voltage
    • 7-12V, PWR_IN
    • 4.8-6V, SERVO_PWR, depending on your servo
  • Compatible module voltage:
    • 5V
    • 3.3V
  • Support interface:
    • I2C
    • SPI
    • Xbee (Xbee pro)
    • Bluetooth
    • APC220

ΔΥΝΑΤΟΤΗΤΕΣ

  • Compatible with the new Arduino Due
  • 3.3V/5V operating voltage select
  • Switch for wireless communication & programme
  • More Easily recognitive interfaces
  • Colorful header for illustrating digital or analog pins
  • Immersion gold surface

ΑΡΧΕΙΑ

ΒΙΝΤΕΟ

The Secret Behind A Professional Arduino Board Design

DFRobot Gravity has been market-proven to be a high-quality open-source electronics toolkit for a project developer to build prototypes easily. And the secret behind it is the DFR0265 board that we’re going to introduce today, the latest version of IO expansion shield for Arduino.