Προσοχή! Στο site μας χρησιμοποιούμε Cookies για στατιστικούς λόγους, κανένα προσωπικό στοιχείο δεν συλλέγεται ή αποθηκεύεται. Μάθετε περισσότερα εδώ. OK

Infrared LED Board (B)

Waveshare, 10670
31-00010670
Light-sensing Infrared LED Board, Wide Field of View.
4.90
Διαθέσιμο
+
Προσθήκη στα Αγαπημένα
Διαθεσιμότητα Καταστήματος
Περιορισμένη Διαθεσιμότητα
Light-sensing Infrared LED Board, Wide Field of View.
Κατασκευαστής :
Waveshare
MPN:
10670
Χώρα Προέλευσης:
Κίνα
  • Limited by the Raspberry Pi power supply, the 3W high-power infrared LED might cause the Pi to increase heating, heat sinks are suggested.
  • Ideal imaging distance is within 3m. When the distance goes up to 6m, the night vision camera can just capture blurry outlines.
  • It's recommended to buy 2 pieces when using with Raspberry Pi cameras, both the left and right sides.
  • 3W high-power 850 infrared LED
  • Onboard photoresistor, the ambient light detector
  • Onboard adjustable resistor, for controlling the ambient light threshold of toggling the infrared LED
  • Allows adding night vision function to cameras which feature embedded infrared filter :
    • 100 degree field of view, two pieces of LED is required to get wider field of view
    • Supported devices : RPi Camera (E), RPi Camera (F), RPi Camera (H)
  1. Connect the Infrared LED Board to the camera PCB by screws
    • The screw holes are used for both attachment and power supply
  2. Adjust the adjustable resistor to set a proper ambient light threshold, which toggles the infrared LED automatically
    • When ambient light is lower than threshold value, the infrared LED is on, vice versa
  1. Infrared LED Board (B) ×1 (Only 1 LED is included, it's recommended to buy 2 pieces when using with Raspberry Pi cameras, both the left and right sides)
  2. Screws ×2
Οι φωτογραφίες των προϊόντων μπορεί να διαφέρουν απο την πραγματικότητα. Προσπαθούμε να παρουσιάσουμε το προϊόν όσο καλύτερα γίνεται.